Models > GLGC30S9EBA

GLGC30S9EBA Frigidaire Cooktop - Overview

Get Parts and Repair Help for GLGC30S9EBA

If you know the cooktop repair part you need, you can browse the list of all parts on the GLGC30S9EBA, or you can search by name or part description. You can also find your part by where it is located on the GLGC30S9EBA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the GLGC30S9EBA [Viewing 4 of 4]

$32.07

Sealed Burner Head - 14k

$10.20

Medium Burner - 9.5K

$37.39

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$24.68

Top Burner Orifice - 9.5k

$21.14

Medium Burner Cap - Black - 9.5k

$5.29

Igniter/Orifice Mounting Screw

$25.38

Top Burner Orifice - 14k

$64.18

Burner Cap

$40.41

Gas Surface Burner - 12,000 btu

$40.95

Small Burner Cap

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The burner would not light by itself, and the flame was lopsided.

  • Customer: Roland from Auburn ME
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 9 of 10 people found this instruction helpful
The repair was nothing, but the diagnosis was a bit tricky. After carefully looking at the burner head, (cast aluminum) I pretty much figured out that the 4 small cast aluminum bumps that keep the burner cap positioned up in the air the correct amount to allow gas to flow under the cap, were worn down, preventing the gas from exiting properly by the igniter... read more

broken ceramic burner element

  • Customer: Phillip from Saint Simons Island GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 7 of 8 people found this instruction helpful
Simple: remove the element by hand and replace new one.

I can't believe how quickly I received my new part -literally next day. read more

burner ingnighter would not lite burner

  • Customer: Wayne from Palestine IL
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers, Wrench(Adjustable)
  • 15 of 48 people found this instruction helpful
Replaced the ingintion module, still did not work, replaced the burner complete with new ingiter , it now works but another one quit . the front right one has 5 ohms resistance ,replaced with new one with 0 ohms, the back left has 2 ohms resistance and now it does not work , will need to replace that burner allso. too bad you can't buy just the spark module ... read more