Models > GLEC36S8ESA

GLEC36S8ESA Frigidaire Cooktop - Overview

Get Parts and Repair Help for GLEC36S8ESA

If you know the cooktop repair part you need, you can browse the list of all parts on the GLEC36S8ESA, or you can search by name or part description. You can also find your part by where it is located on the GLEC36S8ESA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$27.61

Single Control Knob

This is only 1 knob and is sold individually.

$5.62

SCREW

$31.21

Surface Burner Switch - 6"

This switch controls the stove top surface burner.

$5.71

SCREW

$29.41

KNOB

$160.88

Dual Radiant Surface Element - 6" 1200W - 9" 2500W

$53.70

Infinite Switch Kit

$31.64

BUSHING

$131.07

Surface Burner Element - 6" - 1200W

$25.96

LIGHT

Common Symptoms of the GLEC36S8ESA [Viewing 1 of 51]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

burner wouldnt heat

  • Customer: KEVIN from CADET MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 9 of 25 people found this instruction helpful
took out 2 screws and disconnected wires . read more

cooktop burner would not go on

  • Customer: Clement from Fellsmere FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Turn off braker,lift cooktop from counter and remove acces panel unscrew switch from cooktop and replace one wirer at the time than resrew everything together. read more

The warning light for the warmer was stuck "on"

  • Customer: Linda from Pleasant Mount PA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Turned off electric at the main box. Removed glass top. Used a razor knife to pry the connections loose so that the new connections could be slid in. Problem was that the element ordered looked entirely different then the original one. Even the hookup was different. But once the connections were made, the ceramic top placed on top, and the electric restored ... read more