Models > GLEC36S8CSB

GLEC36S8CSB Frigidaire Cooktop - Overview

Get Parts and Repair Help for GLEC36S8CSB

If you know the cooktop repair part you need, you can browse the list of all parts on the GLEC36S8CSB, or you can search by name or part description. You can also find your part by where it is located on the GLEC36S8CSB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the GLEC36S8CSB [Viewing 4 of 4]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Single Control Knob

This is only 1 knob and is sold individually.


Dual Radiant Surface Element - 6"/9"




Surface Burner Switch - 6"

This switch controls the stove top surface burner.


USE WCI 903097-9050




Dual Burner Element Assembly - 1800/2600W




Surface Burner Element - 6" - 1200W


Surface Burner Switch - 6" Warmer

Common Symptoms of the GLEC36S8CSB [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

burner wouldnt heat

  • Customer: KEVIN from CADET MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 10 of 28 people found this instruction helpful
took out 2 screws and disconnected wires . read more

The warning light for the warmer was stuck "on"

  • Customer: Linda from Pleasant Mount PA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Turned off electric at the main box. Removed glass top. Used a razor knife to pry the connections loose so that the new connections could be slid in. Problem was that the element ordered looked entirely different then the original one. Even the hookup was different. But once the connections were made, the ceramic top placed on top, and the electric restored ... read more

"hot" indicator light on glass cook top burned out

  • Customer: Kathleen from Middlebury VT
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
After removing pots / pans in cabinet below cook top and turning off the power, I was able to remove the panel held by 2 screws. Pulling the old light out was just a little difficult as it came in pieces. New one popped right in, hooked up terminals, replaced the panel and that was it !! read more