Models > GLD6700N00CC

GLD6700N00CC General Electric Dishwasher - Overview

Get Parts and Repair Help for GLD6700N00CC

If you know the dishwasher repair part you need, you can browse the list of all parts on the GLD6700N00CC, or you can search by name or part description. You can also find your part by where it is located on the GLD6700N00CC by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your dishwasher. We’ve also included any installation videos we have for GLD6700N00CC parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$1.25

Single Lower Wheel Stud/Axle

Sold individually. This is just the axle that holds the wheel in place on the dishrack. The wheel is sold separately.

$1.48

Single Lower Rack Wheel

This wheel is located on the lower rack. It is sold individually and does NOT come with the attaching axle.

$0.64

RACK SLIDE END CAP

This part attaches to the rails, for the upper rack, to prevent the dishrack from sliding all the way out.

$2.91

Recess Door Spring

$43.36

Detergent Dispenser with Rinse Cap

$1.49

Upper Rack Wheel

This dishwasher rack wheel is sold individually. It is white in color and does not come with the attaching axle.

$46.61

Water Inlet Valve

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the d...

$10.04

Middle Spray Arm

$8.64

Door Handle Actuator

$23.51

Lower Spray Arm

This spray arm is located on the lower half of your dishwasher. Water is forced through this spray arm by the unit's pump and motor assembly. The force of the water propels the spray arms, spraying water and detergent onto the dishes on the dishrack.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Wheels missing or broken

  • Customer: MARIEANNE from WOODBRIDGE VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 66 of 66 people found this instruction helpful
...on the lower rack of the dishwasher. I simply snapped the pieces together and then snapped them into place. No tools necessary other than my own two hands (and the scissors I used to cut open the package!) read more

Wheels on bottom rack were either broken or melted

  • Customer: Maria from wright WY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 78 of 142 people found this instruction helpful
It was really easy I just snapped the axle and the wheels together and then snapped them onto the rack! simple as that read more

wheel axles are defective - wheels fall off

  • Customer: Chris from Decatur GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 75 of 138 people found this instruction helpful
The part indicated here is a new design to replace a defective part that fails to keep the wheels on the lower dish rack. So far, the new axles work fine. Removal/Replacement couldn't be easier - it is helpful to use needle-nose pliers to get the old axles out. The new ones just snap in. Wheels stay on just fine. The rack is designed to roll on 8 total wheel... read more