Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GJD3044LP01

GJD3044LP01 Whirlpool Cooktop - Overview

Get Parts and Repair Help for GJD3044LP01

If you know the cooktop repair part you need, you can browse the list of all parts on the GJD3044LP01, or you can search by name or part description. You can also find your part by where it is located on the GJD3044LP01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. We’ve also included any installation videos we have for GJD3044LP01 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the GJD3044LP01

[Viewing 2 of 2]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Grease Filter

$4.79

SEAL-SWTCH

Order within the next 4 hrs and your part ships today!

BOWL-DRIP

COVR-CONDU

$6.05

SEAL-SWTCH

Order within the next 4 hrs and your part ships today!
$4.94

KNOB

Order within the next 4 hrs and your part ships today!
$4.79

SEAL-SWTCH

Order within the next 4 hrs and your part ships today!
$89.20

GRILLE

Order within the next 4 hrs and your part ships today!
$36.93

LIGHT-IND

Order within the next 4 hrs and your part ships today!
$350.48

Main Cooktop Glass with Bracket - Black

Common Symptoms of the GJD3044LP01

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Hot Burner Light always on

  • Customer: Gregory from Cary, NC
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 71 of 103 people found this instruction helpful
Thermal switch is integral to element and can not be changed, must replace entire element.

Turn off power. Removed front two screws above oven door jamb and lifted the top. Removed the bracket that holds the element against the glass top and removed the element. Moved brackets from old element to new one, aligning to same numerical position and th... read more

No heat on burner

  • Customer: paul from trumbull, CT
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Socket set
  • 27 of 35 people found this instruction helpful
Turned off electricity! Pulled stove out -lifted up glass top(carefully) simply removed burned out coil and replaced it with new one. read more

Stovetop element burned out

  • Customer: Lonnie from Ashton, ID
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 15 of 17 people found this instruction helpful
First of all, I shut off the electricity to the stove.

I had to remove the two screws holding the stovetop in place. I then lifted it up and braced it to keep it from falling, removed the bad element, carefully marking the 4 wires that were connected to the element. I then disconnected the wires, and removed the two brackets holding the elemen... read more