Models > GJC3655RP03

GJC3655RP03 Whirlpool Cooktop - Overview

Get Parts and Repair Help for GJC3655RP03

If you know the cooktop repair part you need, you can browse the list of all parts on the GJC3655RP03, or you can search by name or part description. You can also find your part by where it is located on the GJC3655RP03 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the GJC3655RP03 [Viewing 1 of 1]

$3.84

SCREW

$2.70

SCREW

This screw is sold individually.

$10.48

Main Power Terminal Block

$3.84

SCREW

Sold individually.

$93.33

Element, Surface (2000/1000W RR)

$115.46

Radiant Surface Element - 2500/1200W LF

$377.73

Glass Cooktop - Black

$40.27

TAPE

$25.51

HARDWARE

$3.84

SCREW

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Loose terminal caused block to overheat and break

  • Customer: Dana from Black Mountain NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 5 of 8 people found this instruction helpful
Removed all terminals and block mounting screws. Repaired one burnt terminal and reassembled. Replacement part was an exact fit and reassembly whnet very well. read more

I snapped a bolt on the main power terminal block when connecting the pigtail.

  • Customer: Frank from Palm Coast FL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 3 of 4 people found this instruction helpful
Removed the small metal panel covering the main power terminal in back of the electric range. Removed the nuts holding the red, white and black electrical wires from the range using the appropriate socket (there will be two nuts on each bolt end). Removed the two screws holding the main power terminal block with appropriate screw driver. Connect the new main... read more

Block broke

  • Customer: Edward from Crimora VA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 1 of 3 people found this instruction helpful
Unplug power cord, remove wires from block. take 2 screws out. replace with new block about 15 mins. Done read more