Models > GJC3634RC05

GJC3634RC05 Whirlpool Cooktop - Overview

Get Parts and Repair Help for GJC3634RC05

If you know the cooktop repair part you need, you can browse the list of all parts on the GJC3634RC05, or you can search by name or part description. You can also find your part by where it is located on the GJC3634RC05 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the GJC3634RC05 [Viewing 2 of 2]

$3.83

SCREW

$83.79

Dual Element with Limiter - 2400W

With this element, you can adjust the size of the burner you want to use to match your pots/pans.

$74.00

Surface Element - 1200W

$38.70

Infinite Switch

This switch is used for the right rear and left front burner.

$15.30

Burner Knob

Sold individually.

$38.87

6" Surface Element Infinite Switch

$3.83

SCREW

Sold individually.

$45.05

Switch, Rotary (Accusimer)

$4.60

SEAL-SWTCH

$2.70

SCREW

Common Symptoms of the GJC3634RC05 [Viewing 1 of 448]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Hot Burner Light always on

  • Customer: Gregory from Cary NC
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 40 of 58 people found this instruction helpful
Thermal switch is integral to element and can not be changed, must replace entire element.

Turn off power. Removed front two screws above oven door jamb and lifted the top. Removed the bracket that holds the element against the glass top and removed the element. Moved brackets from old element to new one, aligning to same numerical position and th... read more

Radiant element, 2400 watt, under Ceran glass cok top needed replacement.

  • Customer: GEORGE from NEWNAN GA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 49 of 108 people found this instruction helpful
turned off power
removed ceran top from cabinet
removed element
installed new element
replaced top
powered up and was done read more

A heat control switch was broken.

  • Customer: Barry from Wichita Falls TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 15 of 21 people found this instruction helpful
I first turned off the power to the stovetop at the breaker box, disconnected the power supply wires, removed the stovetop from the counter, placed the stovetop on a towel on the kitchen table, removed the screws connecting the glass top to the base, removed the glass top, removed additional screws holding the sheetmetal housing for the switches, opened this... read more