Models > GI1500XHB5 > Parts

GI1500XHB5 Whirlpool Ice Maker - Parts

All parts for the Whirlpool Ice Maker GI1500XHB5

Below is a list of all parts for the Whirlpool Ice Maker GI1500XHB5 - Freestanding. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the GI1500XHB5
1-14 of 149
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Water Tube Kit

This tubing is 1/4'' in diameter and comes with 2 inserts. This tubing may be longer than the original, and may have to be cut.


Ice Cutter Grid Complete Assembly

Used with freestanding ice makers.


Ice Cutting Grid Wire

There is approximately 10'of wire. Note:2 kits are needed to replace both directions.


Circulation Pump with Motor

Used in freestanding ice-cube makers.



Sold individually.


Drain Fastener Cap


Compression Nut

This compression nut is used with the plastic water line of the icemaker assembly.


Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".



Sold individually.



Used with stand alone ice cube makers.



This is a high temperature adhesive.


Plastic Tubing Inserts - 4 Included

These inserts are used with 1/4 inch plastic tubing.



This screw is sold individually.


Icemaker Bin Thermistor

This part monitors the temperature and sends the readings to the electronic control board.

All Parts for the GI1500XHB5
1-14 of 149