Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GI1500PHW8 > Parts

GI1500PHW8 Whirlpool Ice Maker - Parts

All parts for the Whirlpool Ice Maker GI1500PHW8

Below is a list of all parts for the Whirlpool Ice Maker GI1500PHW8 - Freestanding. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the GI1500PHW8
1-14 of 149
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$137.02

Ice Cutter Grid Complete Assembly

If your freestanding ice maker is not producing ice properly, the ice cutter grid assembly may need replacing. The cutter grid is located within the main unit of the ice maker, and...

$36.88

Thermostat, Bin

This is a bin thermostat made for standalone ice makers to activate the ice maker shut-off when bin is full. It senses how much ice is in the bin to determine if it should produce more ice or activate shut-off. The bin thermostat may need to be replaced if bin is overfilled, underfilled, or not producing ice. Thermistor can be tested with an ohm meter. This part is made of plastic and metal, and is white in color. This is an authentic part sourced from the original manufacturer.

$92.13

Condenser Fan Motor

NOTE: As per the manufacture the part does not come threaded. A self tapping screw will need to be used to make threads.

$35.13

Ice Cutting Grid Wire

There is approximately 10' of wire. Note: 2 kits are needed to replace both directions.

$17.80

Drain Fastener Cap

This is a drain fastener cap and is used in conjunction with your freezer/refrigerator. This model is almost 1.5 inches in diameter, half an inch thick, and is white in color. This...

$211.19

Circulation Pump with Motor

The circulation pump assembly, used in a free-standing ice maker, delivers water from the water tank over the top of the evaporator plate. It does this to form the ice that drops onto the cutting grid. The first step in installing this part is to remove the chute, ice scoop bracket, water pan, and head cap screw that holds the plastic cover over the pump. Refer to the manufacturer-approved installation instructions for further guidance and accuracy. Make sure to disconnect and unplug the ice maker from the power source before installing the circulation pump. Remember to wear gloves to protect your hands.

$24.48

Evaporator Thermistor

Used with free-standing ice cube makers.

$32.86

Tube, Plastic

Used with stand alone ice cube makers.

$5.58

Compression Nut

The compression nut is used as a connection between the water supply line and other components in your refrigerator such as your ice maker and your water dispenser. Tools required ...

$4.48

Screw

Sold individually.

$3.02

Screw

Sold individually.

$13.76

SCOOP

$4.87

Plastic Tubing Inserts - 4 Included

This is a plastic tubing insert kit for a refrigerator ice maker. This kit includes a package of four tubing inserts. The kit does not include other parts such as the ice maker wat...

$3.02

Single Hex Head Screw

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".

All Parts for the GI1500PHW8
1-14 of 149