GH6177XPT1 Whirlpool Microwave - Instructions

Remove plastic retainer around glass front , then removed glass. Unscrewed handle and replaced new handle. I just installed the new grill.

Took the the want burned out , and put the new ones.

Took the replacement plate out of the box and put it in the microwave in seconds. I never realized how much of a difference having the correct microwave plate would make. It's great to have it back.

Problem was easily diagnosed using the internet as a resource, problem was a bad stirrer motor. Hardest part of the repair was the removal of the microwave. Once off the wall, you remove the outer cover and a molded plastic casing directly underneath the outer cover at the top of hte microwave to expose the stirrer motor. Removed two screws and two wires and the old motor is out. Did exactly the opposite to install the new motor. The kit I recvd included among other things the motor, a new inside cover, plastic rivets and even silicone to seal the inside cover. I am sure I saved a couple hundred dollars by doing myself.

Followed the instruction booklet that came with the microwave. Very easy.

I want to thank PartSelect for thier assistance with my grease and filters that were needed for our microwave. We just bought a home and although the appiances are still in good working condition and only 6 years old they have not been maintaned well at all. The filers needed replacing and our local chain of hardware stores do not carry any of the sizes we needed. I went on line and found PartSelect.com and reviewed what they offered. I really could not find what I needed so I called customer service and the women on the other end of the phone went through in great detail as to the sizes and quantities I would need. I have since then received the filters and they were extremely easy to install and fit perfectly. Very helpful site. KDS

The replacement grille fit to factory specs, requiring a simple snap in place installation.

I just opened the box and set it in. Took all of two minutes.

Easy, perfect

The only to repair the vent grill was to purchase a new one. I went ahead and found a the replacement part and waited 5 days when it arrived. Very easy installation. Ijust lined it uap amd popped it in place. With a screwdriver I made sure to extend the clips slightly to ensure they fit snuggly to ensure they held the vent tightly

Received new cover the next day. Snapped new cover in place with no problems.

Snap the new one in place.

Had to replace 1 latch in order for the microwave door to close.

replaced burnt parts

Attached additional 3rd clip using phillips screwdriver, snapped vent into place. That's it. Addionally, I ordered the piece (at roughly one third price of factory) on thursday, it arrived saturday !! Excellent !!