Models > GH5184XPS7 > Instructions

GH5184XPS7 Whirlpool Microwave - Instructions

All installation instructions for GH5184XPS7 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the microwave repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the GH5184XPS7
106-120 of 123
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

vent grill broke

  • Customer: robert from sacramento CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
adjusted clips to proper postion ( 2 min ) snapped in place.Total repair time appox. 4 minutes.

Vent grill for microwave had broken tabs and would not stay on

  • Customer: Thomas from Boynton Beach FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I received the part very quickly after I ordered it-within 2 days! Part was the right part, and had instructions which were fairly easy to follow. It took only about 5 minutes and a screwdriver to install the new vent grill. Awesome, looks great, right part and an ease to install. My neighbor had the same problem and I ordered another which also came within 2 days! 5 minutes and it was installed perfectly also. Appreciate the great service!

broken clips

  • Customer: Gerald from Madawaska ME
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Unsnap grille and snap on new one. Took less than a minute.

needed a replacement filter

  • Customer: Otha from Missouri City TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
slide the old one out of the slot and insert the new one in its place.

broken glass cooking tray for microwave

  • Customer: Vanessa from Atlanta GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Twas really easy considering that all I had to do was place the plate back in the microwave. Easy Peasey

broken glass microwave tray

  • Customer: Ronald from Rhinelander WI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Tray arrived in a short period of time and was a perfect match.

Replace turntable motor

  • Customer: Monty from Mansfield TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
removed perimeter screws from the bottom side and the lower cover is hinged at the wall side. Motor is visible and easily removed with two screws. Take of the old one, install the new one, and reverse the procedure to put the bottom cover back in place. Will nee helper to hold one side of the bottom until couple of screws can be put in on the other side.

Vent Grille clips broke off

  • Customer: Teresa from Grapevine TX
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Snap the new one in place.

Broken plate

  • Customer: JASON from ABSECON NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Took the replacement plate out of the box and put it in the microwave in seconds. I never realized how much of a difference having the correct microwave plate would make. It's great to have it back.

Microwave was making a grinding sound

  • Customer: William from Huntington Beach CA
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Problem was easily diagnosed using the internet as a resource, problem was a bad stirrer motor. Hardest part of the repair was the removal of the microwave. Once off the wall, you remove the outer cover and a molded plastic casing directly underneath the outer cover at the top of hte microwave to expose the stirrer motor. Removed two screws and two wires and the old motor is out. Did exactly the opposite to install the new motor. The kit I recvd included among other things the motor, a new inside cover, plastic rivets and even silicone to seal the inside cover. I am sure I saved a couple hundred dollars by doing myself.

Bulb burned out

  • Customer: Lester from Mesquite TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
You had alerted that it was imperative to unplug unit before starting to remove defective bulb. As described, there was silicon on bulb and socket and bulb broke upon my attempt to remove. Had to use needle nose pliers to get metal base of old bulb from socket, then all went well.

Grease & Fiter vents

  • Customer: Kymberly from Beaumont CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I want to thank PartSelect for thier assistance with my grease and filters that were needed for our microwave. We just bought a home and although the appiances are still in good working condition and only 6 years old they have not been maintaned well at all. The filers needed replacing and our local chain of hardware stores do not carry any of the sizes we needed. I went on line and found PartSelect.com and reviewed what they offered. I really could not find what I needed so I called customer service and the women on the other end of the phone went through in great detail as to the sizes and quantities I would need. I have since then received the filters and they were extremely easy to install and fit perfectly. Very helpful site. KDS

it was working fine and it stopped order a fuse and it wasn't the problem

  • Customer: Herb from Auburn IN
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required:
  • 0 of 0 people found this instruction helpful
took it to Buttermore appliance in Auburn Indiana and he changed the fan and added another fuse

The microwave grille vent was cracked and the clip was broken.

  • Customer: Scott from Tampa FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The replacement grille fit to factory specs, requiring a simple snap in place installation.

The glass tray in the microwave got chipped while i was washing it and started to crack.

  • Customer: Amber from Loretto PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I just opened the box and set it in. Took all of two minutes.
All Instructions for the GH5184XPS7
106-120 of 123