Models > GH5184XPS4 > Instructions

GH5184XPS4 Whirlpool Microwave - Instructions

All installation instructions for GH5184XPS4 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the microwave repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the GH5184XPS4
91-105 of 116
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken clip holder

  • Customer: Joseph from York ME
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Remove broken grille and snapped new grille in place. Very easy to do. Very poor design by Whirlpool. This is my third grille in 4 years. Thank you PartSelect for carrying the replacement grilles.

Hood vent cover was broken

  • Customer: Dave from belvidere IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
the hood vent cover was broken this is the second time i replaced it there was a new clip added to the vent the first one i bought from Whirlpool this one i got it from part select it matches perfect easy to put in.

vent grille fell off and broke.

  • Customer: william from surprise AZ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Easy order for new replacement grill. Easy to pop it right back on.

soap and rinse aid were not dispensing

  • Customer: steve from Bartlett IL
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
I removed the front cover, which allowed access to the soap dispenser. You need a 1/4" driver set to unscrew the dispenser. I installed the new dispenser, and the dishwasher worked great. The inital problem of the soap door not opening, and the rinse aid not dispensing, was solved.

machine was dead.

  • Customer: Mark from Smithtown NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
After removing the over-the-range unit (no small feat!) I had to figure out how to open the case (good puzzle!). Capacitor had already discharged, so it was very easy to reach in, pop the old fuse and install the new one! As per your advice, I found out I was a "28%-er"! Upon re-installation, the microwave "sprang to life"!! Thanks, "Part Select"!! I was already shopping around for a new machine! (Now if you could only tell me an easier way to re-mount this heavy beast over the stove!!!)

vent grill was broke

  • Customer: issac from hallandale bch FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
just snap in to the place very easy

Vent Grille clips broken

  • Customer: Tessa from Oakton VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Opened the box, took the new part out and snapped it on. Easy. Fit perfectly. Took less than 2 minutes. Looks great!

rotating glass dish assembly making stange noise

  • Customer: Lawrence from Excelsior MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The lady in the Nova Scotia call center should get all the credit for being able to identify the part I needed from only the very limited information I was able to give her. Employee of the month for her. She also had such a great can do attitude. Lawence Baier

Broke a 15 year old glass cooking tray

  • Customer: Stephanie from La Jolla CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Ordered the item on a Monday at 12pm and it arrived the next day. Amazing!

glass cooking tray droped and broken

  • Customer: janice from dunn NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
just replace need cooking tray

plastic posts holding screws on grille broke

  • Customer: Guido from Roanoke VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Lined up the new grille to appropriate tabs and snapped it in. No tools needed

top vent fell off

  • Customer: Christine from North Aurora IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
was able to find the part needed using the microwave model number. i ordered the part and was able to replace it in less than 5 minutes - was great to find the part needed easily and fix the eyesore!

Broken turntable support ring and missing support

  • Customer: Sharon from Pleasanton CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Watched video which reminded me to order support for the turntable support ring and did exactly what the person in the video did. Excellent and prompt service and all parts fit.

glass turn table would not turn

  • Customer: CJ from Bullard TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
After researching online, I found that I needed the turntable drive coupling, part#PS993087. when I went to your site it showed the same part but the part number had changed but said it would fit my microwave. Well, I was really surprised and happy when the part I received 3 days after I placed the order, with normal shipping,fit perfectly and now my turn table in my microwave works. I have marked this site a a favorite and will use it I'm sure soon. Being a single women and having to figure out how to fix the things on a small buget, I'm learning a lot and have a lot of respect for men that know how to do all the repair stuff. Thanks so much, I have been able to mark this off my list of things to fix. Have a nice day. Cj- age, 58

broken cooking tray. Food not heating evenly.

  • Customer: James from Winter Park FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Simply placed new dish on the rotating hub.
All Instructions for the GH5184XPS4
91-105 of 116