Models > GH5184XPS3 > Instructions

GH5184XPS3 Whirlpool Microwave - Instructions

All installation instructions for GH5184XPS3 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the microwave repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the GH5184XPS3
31-45 of 121
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Dirty charcoal filter

  • Customer: Carlton from Cameron NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 3 of 4 people found this instruction helpful
Simply remove two screws with a crosstip screwdriver securing the vent louvers from top of microwave, remove the old charcoal filter and replace new filter as describe in the owners manual. Very easy installation and partselect parts are very inexpensive and durable to other sites.

Broken Vent Grille for the microwave

  • Customer: Ron from Summerville SC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 4 people found this instruction helpful
Thanksgiving night, I found a rather large crack in the grille and it wouldn't stay in place. I placed the order for the replacement grille on Friday and received the new grille Monday. It just snapped in place, no tools necessary. I had contacted the Sears parts replacement department and all I got was attitude from the parts "help" desk. I'm glad I placed the order with Parts Select, the cost was cheaper and shipping was faster. I won't hesitate to use Parts Select the next time I need a part for any of my Whirlpool appliances.

Grill Broke

  • Customer: Andrew from Carlsbad CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 3 people found this instruction helpful
SO EASY... It just clipped right in...

mounting plate

  • Customer: Paul from Lincoln NE
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 3 people found this instruction helpful
If you buy a used microwave, be sure the mounting plate is with it. Buying one is always more than $25 bucks and takes time.

Broken vent grille.

  • Customer: Claude from Maramar FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 3 people found this instruction helpful
It was very easy, no tools needed. I simply snapped the new part into the self aligning grooves.

Vent grille broke

  • Customer: Taylor from Jacksonville FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 3 people found this instruction helpful
removed old grill and snapped new one in place. Quick delivery thanks

Microwave vint was broken

  • Customer: Basma from Charleston AL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 6 people found this instruction helpful
Was really easy I removed the old one and install the new one in just one minute.

replacement of charcoal filters in microwave

  • Customer: Hendrika from Campbell CA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 3 people found this instruction helpful
This wasn't really a repair, just an replacement of the filters, which is a regular maintenance requirement.

grill broke

  • Customer: Patricia from Brick NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 3 people found this instruction helpful
just snapped top in,
Service was excellent, could not get any better service.

Original vent grille clips broke off, so the grille would not stay on.

  • Customer: Frances from Happy Valley OR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 3 people found this instruction helpful
Just installed the new grille in place of the old one. (That is after I received the correct one, since I initially ordered a white one which definitely did not go with my stainless microwave!)

Old part would not stay on due to broken clip base

  • Customer: Richard from League City TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 3 people found this instruction helpful
Ordered new part on Thursday night and new part arrived the following Monday. After unpacking I just snapped the new grille in place and the job was done. I was really impressed with the quick service that I received from PartSelect.

Microwave vent grill broken

  • Customer: Mark from Corpus Christi TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 3 people found this instruction helpful
Unpacked the replacement and popped it into place.

vent grille was damaged and would not stay on.

  • Customer: Beau from Cary NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 4 people found this instruction helpful
easy squeasy, lemon-peasy. Took all of 15 seconds. Opening the box took longer than installing the vent. It just snaps right in place.

Broke rotating plate, it fell off counter after being washed

  • Customer: Lois P from Morris IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 2 of 4 people found this instruction helpful
Opened door and put new plate in.

Placed order on Thursday evening and received Sat Am

Broken Grill

  • Customer: James from South Bend IN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 1 people found this instruction helpful
Snaped new grill into place
All Instructions for the GH5184XPS3
31-45 of 121