GH5184XPS3 Whirlpool Microwave - Instructions

used screw driver to pry up old part. lifted right off. line up drive couple drive push on. repair took less than 1 minute to repair. works like new
Very Pleased with Parts Select replacement parts

Fit it into the frame and it popped right in.

Exact piece arriven. All I had to do was line it up on the correct bottom guides press hard on the top and it snapped into place. Everything lined up.

I was sent the wrong fuse by you. I had to procure a fuse in another manner. Very disappointing. The repair was simple. It just took longer because of the failure to send the correct fuse.

Read the instructions that came with the parts. Looked at the parts and placement. It was easy to see where everything went.

Took out the turntable parts to ensure I ordered the correct cooking tray. Matching those with photos of related parts on PartSelect worked great. Put turntable drive and support ring in place and cooking tray went in very easily. Plan to order a second one to have on hand for this rental property.

Unscrewed glass panel, removed old bulb, cleaned glass panel and installed new bulb. Screwed panel back into place.

Ordered new part and replaced it!!!!

After removing the over-the-range unit (no small feat!) I had to figure out how to open the case (good puzzle!). Capacitor had already discharged, so it was very easy to reach in, pop the old fuse and install the new one! As per your advice, I found out I was a "28%-er"! Upon re-installation, the microwave "sprang to life"!! Thanks, "Part Select"!! I was already shopping around for a new machine! (Now if you could only tell me an easier way to re-mount this heavy beast over the stove!!!)

with just two hands

I aligned the brackets and the little tabs and put
in place. Nothing to it.

Ordered the glass tray and installed it. Received the orderin about two days.

Just popped the new grill into place

since all of the screws (and a piece fell off), the new grill-vent just had to be attached

replaced with new one