Models > GH5184XPS2 > Instructions

GH5184XPS2 Whirlpool Microwave - Instructions

All installation instructions for GH5184XPS2 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the microwave repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the GH5184XPS2
1-15 of 121
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken grill

  • Customer: J Richard from Long Beach MS
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 459 of 461 people found this instruction helpful
Adjusted clips inserted grill less then two minutes.It took me longer to unwrap the package then it took to install.Ordered part on line 10:45 am delivered 2:30 pm next afternoon.Less then 28 hours later. What service.

The grill-vent broke and the grease filters needed to be replaced.

  • Customer: M. Rose from Miami FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 483 of 619 people found this instruction helpful
I simply placed the grill-vent in hood area, pulled out the dirty grease filters and slid in the replacement ones.

Grill cracked and broke in half

  • Customer: JEFFREY from HUBER HEIGHTS OH
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 441 of 519 people found this instruction helpful
Purchased new part online. Partselect parts list indicated 3 different part numbers with no other distinction. As a result, I accidentally ordered the wrong color. I had to mail the part back and reorder. Partselect should correct their parts lists to indicate the color of the part.
Once I had the right part, installation was simple.

broken glass turntable

  • Customer: Deborah from Baltimore MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 370 of 373 people found this instruction helpful
No repair- just replaced glass turntable.
Right part I needed with first try

Broken Grill-Vent legs

  • Customer: Alberto from Chula Vista CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 280 of 494 people found this instruction helpful
Removed manually grill vent and replace it with new one.
Grease and filters where manually replaced.

Door on microway has allignment issues, that can't be repair unless I change entire door assembly

Whenever touched, the grill fell to the floor.

  • Customer: Joan from Flowery Branch GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 150 of 290 people found this instruction helpful
Stood on a step stool so as to be tall enough to see all the places that the top edge and bottom edge must mesh, then pressed into place,

previous grill vent broke

  • Customer: Phil from Bucyrus OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 146 of 285 people found this instruction helpful
removed the holder screw and reshaped the holder and installed the vent grill to the microwave. The design appears to be a poor one which allows breakage.

The vent grille that sits above the microwave started coming off. Upon inspection, one of the clips had broken.

  • Customer: Vivian from Pembroke Pines FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 143 of 280 people found this instruction helpful
When we received the vent grille, my husband popped it back on within 5 seconds . . . it was that easy! It took more time to get the part out of the shipped box than it took to put it on. Make sure you get the correct part and color, though. I didn't get the correct color and had to ship it back (my fault so I had to pay the shipping costs again, plus the shipping cost to get a correct part). If you have any questions when ordering, just call them -- they are the nicest people to deal with. All in all, this was an excellent experience!

Microwave did not have grill cover

  • Customer: Rachael from Philadelphia PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 142 of 281 people found this instruction helpful
The grill vent snapped easily into place. Thank you!

Glass microwave turntable shattered while taken out for a cleaning.

  • Customer: STEPHEN from FORT MYERS FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 85 of 151 people found this instruction helpful
PartSelect had the turntable I needed at the best price. Ordering was easy, but best of all, the part was delivered next day. I was able to insert the new turntable plate into the microwave and it was good as new.

Replacement turntable glass

  • Customer: Beverly from Hauppauge NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 73 of 135 people found this instruction helpful
Opened the box and popped it in. No problem with that.

I broke the glass plate to the microwave.

  • Customer: Rosalina from Madera CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 64 of 126 people found this instruction helpful
The part was sent to me the next day! And it was the right part. Awesome!

Broken Microwave Tray

  • Customer: Eric from Puyallup WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 64 of 127 people found this instruction helpful
This is the second replacement tray we have in installed. The first one ( Not From Here ) we had for less than 5 months, we made a bag of popcorn, and about 5 minutes later we heard a crash, not knowing where the noise came from we dismissed it. The next day we opened the microwave a saw the plate had shattered. So we hope that this will not do the same thing.

Clip that held vent cover on broke off

  • Customer: Linda from Sanford FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 63 of 125 people found this instruction helpful
Clips were installed on vent cover already. Just line it up and pop it on! Part shipped the day after I ordered it (Thanksgiving day), and arrived on Saturday. Super fast service. Part was exactly as ordered.

broken glass turntable

  • Customer: Joseph from Buena Vista CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 64 of 128 people found this instruction helpful
set the table on the support ring
All Instructions for the GH5184XPS2
1-15 of 121