Models > GH4184XSS1 > Instructions

GH4184XSS1 Whirlpool Microwave - Instructions

All installation instructions for GH4184XSS1 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the microwave repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the GH4184XSS1
1-15 of 106
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Grill cracked and broke in half

  • Customer: JEFFREY from HUBER HEIGHTS OH
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 362 of 364 people found this instruction helpful
Purchased new part online. Partselect parts list indicated 3 different part numbers with no other distinction. As a result, I accidentally ordered the wrong color. I had to mail the part back and reorder. Partselect should correct their parts lists to indicate the color of the part.
Once I had the right part, installation was simple.

broken glass turntable

  • Customer: Deborah from Baltimore MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 362 of 364 people found this instruction helpful
No repair- just replaced glass turntable.
Right part I needed with first try

Glass microwave turntable shattered while taken out for a cleaning.

  • Customer: STEPHEN from FORT MYERS FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 82 of 148 people found this instruction helpful
PartSelect had the turntable I needed at the best price. Ordering was easy, but best of all, the part was delivered next day. I was able to insert the new turntable plate into the microwave and it was good as new.

Replacement turntable glass

  • Customer: Beverly from Hauppauge NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 72 of 134 people found this instruction helpful
Opened the box and popped it in. No problem with that.

Whenever touched, the grill fell to the floor.

  • Customer: Joan from Flowery Branch GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 72 of 135 people found this instruction helpful
Stood on a step stool so as to be tall enough to see all the places that the top edge and bottom edge must mesh, then pressed into place,

previous grill vent broke

  • Customer: Phil from Bucyrus OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 69 of 132 people found this instruction helpful
removed the holder screw and reshaped the holder and installed the vent grill to the microwave. The design appears to be a poor one which allows breakage.

Bought Used needed Top Mount Screws and Filters

  • Customer: Michelle from Gilbert AZ
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 69 of 135 people found this instruction helpful
Awesome! Everything fit and worked! Thanks!

The vent grille that sits above the microwave started coming off. Upon inspection, one of the clips had broken.

  • Customer: Vivian from Pembroke Pines FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 65 of 126 people found this instruction helpful
When we received the vent grille, my husband popped it back on within 5 seconds . . . it was that easy! It took more time to get the part out of the shipped box than it took to put it on. Make sure you get the correct part and color, though. I didn't get the correct color and had to ship it back (my fault so I had to pay the shipping costs again, plus the shipping cost to get a correct part). If you have any questions when ordering, just call them -- they are the nicest people to deal with. All in all, this was an excellent experience!

Microwave did not have grill cover

  • Customer: Rachael from Philadelphia PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 65 of 127 people found this instruction helpful
The grill vent snapped easily into place. Thank you!

I broke the glass plate to the microwave.

  • Customer: Rosalina from Madera CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 64 of 126 people found this instruction helpful
The part was sent to me the next day! And it was the right part. Awesome!

Broken Microwave Tray

  • Customer: Eric from Puyallup WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 64 of 126 people found this instruction helpful
This is the second replacement tray we have in installed. The first one ( Not From Here ) we had for less than 5 months, we made a bag of popcorn, and about 5 minutes later we heard a crash, not knowing where the noise came from we dismissed it. The next day we opened the microwave a saw the plate had shattered. So we hope that this will not do the same thing.

Clip that held vent cover on broke off

  • Customer: Linda from Sanford FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 63 of 125 people found this instruction helpful
Clips were installed on vent cover already. Just line it up and pop it on! Part shipped the day after I ordered it (Thanksgiving day), and arrived on Saturday. Super fast service. Part was exactly as ordered.

broken glass turntable

  • Customer: Joseph from Buena Vista CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 64 of 128 people found this instruction helpful
set the table on the support ring

The grill-vent broke and the grease filters needed to be replaced.

  • Customer: M. Rose from Miami FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 62 of 124 people found this instruction helpful
I simply placed the grill-vent in hood area, pulled out the dirty grease filters and slid in the replacement ones.

light bulb burned out

  • Customer: Louis from mancelona MI
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Screw drivers
  • 19 of 24 people found this instruction helpful
when removing the bulb the base broke off and there was an ark took place as I had made a mistake and didn't unplug the unit before working on it , thought with the light switch off it was ok, but still had power in that area . So ALWAYS uplug before making repairs.
The whole unit was dead and I checked for power at the plug and it was live. after unpluging I took the main control panel off and discovered a fuse was blown and replaced it along with a new socket and bulb and now it works like new . the fuses are inside small plastic capsuals so I back probed them with continuity light to find the blown fuse .
It was quite simple once I found how to get the panels off. Just basic common sence will take care of most appliance problems
thanks
Louie Scholl
All Instructions for the GH4184XSS1
1-15 of 106