Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GGE388LXS00

GGE388LXS00 Whirlpool Range - Overview

Get Parts and Repair Help for GGE388LXS00

If you know the range repair part you need, you can browse the list of all parts on the GGE388LXS00, or you can search by name or part description. You can also find your part by where it is located on the GGE388LXS00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for GGE388LXS00 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$21.46

2 Piece Broiler Pan

The top of this part is now black.

$7.22

Touch-Up Paint - White

18ml

$5.70

Appliance Scraper

Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper...

$11.07

Spray Paint - 12 oz. - White

$6.92

Stainless Steel Cleaner

Use this bottle of stainless steel cleaner and polish for any of your stainless steel appliances.

$6.80

Touch-up Paint - Black

16ml

$14.89

Knob - White - Left Front and Right Rear

Sold individually.

$20.80

Spray Paint - Surperior Black

This is a 12oz can of black spray paint.

$141.38

Outer Oven Door Glass - White

$122.09

Outer Oven Door Glass - Black

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The Burner was getting too hot and you could not regular the tempature

  • Customer: Dennis from Hagerstown, MD
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 44 of 50 people found this instruction helpful
Moved the Appliance out unplugged it and removed the backing plate then Remove the Knob and unscrew the infinite switch then marking the 5 wires to know where the go on the new switch, removing and replaced it with the new one read more

Surface Element Out

  • Customer: Terry from Rockwall, TX
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 22 of 26 people found this instruction helpful
Took 2 screws under front edge of smooth top. Unscrewed ground wire from back of smooth top unit. Unplugged 2 wire bundles, from back. Took bad element out , put in new one. Put back together. About 10 min's tops. Easy peasy. read more

Burned terminal block and filter board

  • Customer: Joseph from Decatur, GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 55 of 126 people found this instruction helpful
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem. read more