Models > GGE388LXQ01

GGE388LXQ01 Whirlpool Range - Overview

Get Parts and Repair Help for GGE388LXQ01

If you know the range repair part you need, you can browse the list of all parts on the GGE388LXQ01, or you can search by name or part description. You can also find your part by where it is located on the GGE388LXQ01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for GGE388LXQ01 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.76

Levelling Leg

This leg is sold individually.

$36.04

Oven Rack

Sold individually.

$2.70

Screw

This screw is sold individually.

$5.25

Touch-Up Paint - White

$18.07

2 Piece Broiler Pan

$40.60

Element Infinite Switch - 8"

This is the left front element switch.

$17.76

Terminal Block

It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).

$2.77

Screw - sold individually

$38.41

Infinite Switch - 6"

$17.23

ANCHOR-TIP

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The Burner was getting too hot and you could not regular the tempature

  • Customer: Dennis from Hagerstown MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 27 of 29 people found this instruction helpful
Moved the Appliance out unplugged it and removed the backing plate then Remove the Knob and unscrew the infinite switch then marking the 5 wires to know where the go on the new switch, removing and replaced it with the new one read more

Burned terminal block and filter board

  • Customer: Joseph from Decatur GA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 27 of 56 people found this instruction helpful
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem. read more

SURFACE ELEMENT OUT

  • Customer: Terry from Rockwall TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 13 of 15 people found this instruction helpful
Took 2 screws under front edge of smooth top. Unscrewed ground wire from back of smooth top unit. Unplugged 2 wire bundles, from back. Took bad element out , put in new one. Put back together. About 10 min's tops. Easy Peasy. read more