This is a replacement shock absorber for your washer. The shock absorber is approximately 9 inches long and a little more than one inch wide. It is black and silver in color, and is sold individually....
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kathy
February 17, 2020
The washer shows the off in the control panel but will not turn off. You said that the lock module may need to be replaced. The lock module part came today and we replaced it but it is still showing the off in the control panel. Thanks.
For model number GFWR2700H1WW
Hello Kathy, thank you for your question. If the door lock was replaced and didn't fix this issue, it could be related to the part the door switch relays its message to which is the board. PartSelect Number: PS11772127. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
July 25, 2023
Please identify replacement part with install instructions:
"main rubber seal" replacement part number.
Thanks, Jim
For model number GFWR2700H1WW
Hello James, thank you for getting in touch. The part you are looking for is the door boot seal, part number PS11725311. We have included a video that you may reference on how to install the door boot seal. The washer in the video may appear different from yours, but it will give you a general idea of how to install the part. We hope this helps with the repair.
My washer is not draining. I cleaned the filter like it said two in the manual and it still won’t drain
For model number GFWR2700H1WW
Hi Patti,
Thank you for your question. If your washer will not drain, there are some parts that you will need to check to see which one is causing the issue. First check the drain hose and the pump for clogs. Also make sure that the drain pump is positioned correctly and that it is not placed too far down in the standpipe. If the pump and hose are not clogged and show no visible signs of damage, check the door lock to make sure it is functioning properly. A malfunctioning door lock can prevent the washer from working correctly. We hope this helps! Good luck with the repair!
all formulas work perfectly except 1 formulas for towels and sheets
For model number GFWR2700H1WW
Hi Tom, thank you for your inquiry. According to our research, the issue seems to be with the User Interface Board and you may need to replace it, the part number is PS11763072. We hope this solves your problem!
Remove back cover and with a light and a mirror the screws can be identified. Three hold this pump on. Remove electrical connection then the pump. So also remove the corrugated connecting boot by undoing three clamps. Clean and reassemble
