Models > GFG471LVQ3

GFG471LVQ3 Whirlpool Range - Overview

Get Parts and Repair Help for GFG471LVQ3

If you know the range repair part you need, you can browse the list of all parts on the GFG471LVQ3, or you can search by name or part description. You can also find your part by where it is located on the GFG471LVQ3 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for GFG471LVQ3 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.52

Light Bulb - 40W

Sold individually.

$2.70

Torx Screw

7-18 x 3/4" - sold individually.

$37.24

Bake Igniter

$2.70

Screw

This screw is sold individually.

$2.70

Igniter Screw

This screw is sold individually.

$5.54

Touch-Up Paint - White

$3.83

SCREW

$66.29

Sensor

This temperature sensor detects the temperature within the oven cavity.

$18.07

2 Piece Broiler Pan

$7.87

Grate Pads - Set of 4

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Bake/broil would not work

  • Customer: Greg from North Baltimore OH
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Wrench(Adjustable)
  • 36 of 55 people found this instruction helpful
Replaced igniter and also DSI/direct spark igniter did not fix problem. Called out repairman turned out to be bad gas valve. Replaced that part , now stove works fine. read more

E1 F5 Error on display

  • Customer: Gregory from Thornton CO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 19 of 26 people found this instruction helpful
After reading many forums found that this error happens when trying to clean the oven and there is a failure in the latch motor to lock the oven door. It was suggested 1st to just tunr the breaker off to the over wait and then turn it back on to see if the error would clear by itself. If not then you'll have to do what I did and buy a new Latch Motor and r... read more

temperature not accurate after 3 1/2 years of happy usage

  • Customer: Ruth from Oregon IL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 40 of 89 people found this instruction helpful
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.

The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I tur... read more