This authentic, white Drum Bearing Slide, also known as the bearing drum slide, glide, or pad, is a plastic, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for ...
$18.58
In Stock
Order within the next 5 hrs and your part ships today!
This original equipment manufacturer Drum Bearing Slide is a plastic, green, easy-to-install part for your dryer. It replaces the dryer's front drum slide to allow for easier movement. You'll know if...
$14.29
In Stock
Order within the next 5 hrs and your part ships today!
This Drive Belt is 89.5" long and comes in black, featuring four ribs on the inside for a better grip. This is a long belt that wraps all the way around the dryer drum, around a tension pulley, and th...
$36.13
In Stock
Order within the next 5 hrs and your part ships today!
This light bulb, also known as a drum lamp, illuminates and lights up the dryer drum when the door is open. If the light bulb in the dryer is burnt out or lighting is inconsistent, replacing it can so...
$9.25
In Stock
Order within the next 5 hrs and your part ships today!
This door latch is designed for your dryer, and is mounted to the dryer frame. The door latch holds the door of your dryer closed while the machine is operating. If your dryer door is not catching on ...
$11.38
In Stock
Order within the next 5 hrs and your part ships today!
The interlock switch may also be referred to as a belt switch. This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open. This is a part for your dryer. ...
$27.45
In Stock
Order within the next 5 hrs and your part ships today!
TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the...
$8.54
In Stock
Order within the next 5 hrs and your part ships today!
This is a replacement O-ring for the drum bearing retainer on your dryer. The drum bearing is found at the back of the dryer drum. The O-ring is designed to create a seal on the drum bearing. The O-r...
$9.01
In Stock
Order within the next 5 hrs and your part ships today!
The adjustable leveling screws on the bottom of your dryer can be screwed in or out to lower or raise the leg level. If one of the leveling screws is stripped, damaged, or missing, you may not be able...
$16.51
In Stock
Order within the next 5 hrs and your part ships today!
This part is located on the housing for the heating element.
$37.33
In Stock
Order within the next 5 hrs and your part ships today!
Questions And Answers for GFDN240EL0WW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
8 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
BJ
June 19, 2023
Is the start pause button available for this model dryer?
For model number GFDN240EL0WW
Hi Bj, thank you for your inquiry. According to our research, the start/pause button is not sold separately. It comes as an assembly with the control panel, part number PS3487098. We hope this is what you were looking for!
Hello John, thank you for your question. The issue could be a stuck door catch. We would recommend opening up the cabinet of the unit, and releasing the tabs that hold the door catch, once that is released the door should open and you can replace the door latch and strike assembly, which are PartSelect Number: PS3502777 and PartSelect Number: PS266893. I hope this helps!
Was this helpful?
Thank you for voting!
Staff
March 27, 2020
My door on dryer will not close due the screw will not stay in.
For model number GFDN240EL0WW
Hello Staff, thank you for your inquiry. We would suggest replacing the door strike and/or the door latch, depending on the condition of your existing parts. We hope this helps.
The start button on the dryer continues to flash Green wont start when depressed. Does the button or plastic depression feature which hits the board have to be replaced or is there some other reason it would be flashing?
For model number GFDN240EL0WW
Hi John,
Thank you for your question. Check the connections between the control panel and the electronic control board to see if everything is fitted correctly. If the start button on the control panel is damaged, you will need to replace the control panel. If this is not the issue, then the electronic control board will need to be replaced. We hope this helps! Good luck with the repair!
Hi BJ, thank you for contacting us. We have found a video to help you get to the control panel, part number PS3487098, and disassemble it to view the internal parts. We hope this helps!
Removed the front Dryer panel. Left drum in place and lifted it up slightly to get access to motor drive. Slipped belt in place and put panel back on. This was a first attempt ever at fixing an appliance and it was no big deal.
The end repair was very simple and took minimal effort. The time and difficulty was all in the testing. I disassembled the dryer and removed the drum and then hard wired each thermo-fuse to determine where the fault was. After test all of those I was stumped. When I opened the door the light would not come on so I assumed it was a pow
... Read moreer fault closer to the source. However after all of my testing I couldn't find anything wrong. I then removed the light bulb and realized it was burned out which led me to the door switch being the fault. I removed the switch and soldered the three wire together and the dryer started right up! All I had to do was order a new $15 part, unsolder the wires and plug them in. Would have been so much simpler if that light bulb hadn't of been burned out causing me to over think my diagnosis. This was my first major appliance repair and I did it with only the help of the parts diagram provided on the website.
