Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GFC530H-01

GFC530H-01 General Electric Food Waste Disposer - Overview

Get Parts and Repair Help for GFC530H-01

If you know the food waste disposer repair part you need, you can browse the list of all parts on the GFC530H-01, or you can search by name or part description. You can also find your part by where it is located on the GFC530H-01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your food waste disposer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the GFC530H-01

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$6.80

Splash Guard

The splash guard, also known as a mounting gasket, is used for garbage disposals. The guard creates a tight seal between the sink and the garbage disposal ring. This part is black ...

$3.85

STOPPER ASM

This is a drain stopper assembly for a garbage disposer. It covers your sink drain to prevent water and food from draining through your garbage disposer when it is not in use. When the stopper is not on the sink drain, water and food will freely flow through the garbage disposer. This stopper assembly measures a little over 3 inches in diameter, is black in color, and is made entirely out of plastic. It is sold individually. This assembly does not include your garbage disposal drain stopper gasket and splash guard, so consider checking those parts to see if they need replacing.

$3.31

FLANGE GASKET

This is a flange gasket for a food waste disposer or garbage disposer. The gasket provides a seal between the sink opening and disposal flange. You may need to replace this gasket ...

$9.07

Flange Gasket - Fiber

This item is sold individually. The fiber sink flange gasket works with your food waste disposer. This part creates a seal that prevents any water from leaking. It is positioned between the sink flange and the disposal mounting ring. The flange may break apart over time and cause leaking and will need to be replaced. The flange gasket is donut shaped and is 4 inches in diameter. Before beginning this repair make sure the power to the food waste disposer has been disconnected. This is an OEM part that is obtained right from the manufacturer.

$11.33

CUSHION MOUNTING RING

$23.65

SINK FLANGE

The sink flange attaches to your sink drain opening and provides a connection to mount the disposal unit to the sink itself. If your food waste disposer is leaking, there are a few places that you should inspect. If the leak appears to be coming from around the connection to the sink, look carefully at the sink flange, as there could be an issue with the flange itself, or its gaskets. Remember to disconnect the power from your food waste disposal unit before beginning this repair. This OEM replacement part has an outer diameter of approximately 4.5 inches, and an inner diameter of approximately 3 inches.

$5.13

SUPPORT RING

$23.57

MOUNTING RING

This is a garbage disposal mounting ring, which is also known as a mounting bracket. It attaches the garbage disposal to the sink flange and helps create a watertight seal to prevent leaking. The ring is made entirely of metal, is metallic silver in colour, and is approximately 4.5 inches in diameter from outer edges. It is recommended to check the flange gasket in your garbage disposer before ordering this part in case the gasket is compromised. This is a genuine part sourced directly from the authentic manufacturer, and is sold individually.

$3.92

Flange Gasket

This 1/8-inch flange gasket is designed for use with your garbage disposal. It is made of black plastic and measures approximately 4-1/2 inches in diameter. The ring measures appro...

$4.19

SEAL - ELBOW OUTLET

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Deteriating splash guard

  • Customer: Brian from North Charleston, SC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 53 of 56 people found this instruction helpful
The splash guard for the disposer was deteriorating and kept falling into the disposer and getting chewed up making it even less reliable. I purchased two different 'universal' splash guards at the hardware store. Neither of them fit. I finally crawled under the sink with my eyeglasses and a flash light to find the model number. I searched for the model... read more

Splash guard was worn out

  • Customer: Phyllis from Avon, MN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 10 of 11 people found this instruction helpful
Purchased new one and just put into the hole. read more

Lost or misplaced splash guard

  • Customer: Roger from Star City, WV
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 8 of 10 people found this instruction helpful
What a snap just push it in and all is OK. Tried the generic one from Lowes didn,t work. This was great and cheap including shiping charge. read more