Models > GFC410-02 > Instructions

GFC410-02 General Electric Food Waste Disposer - Instructions

All installation instructions for GFC410-02 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the food waste disposer repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the GFC410-02
1-15 of 29
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Deteriating splash guard

  • Customer: Brian from North Charleston SC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 25 of 26 people found this instruction helpful
The splash guard for the disposer was deteriorating and kept falling into the disposer and getting chewed up making it even less reliable. I purchased two different 'universal' splash guards at the hardware store. Neither of them fit. I finally crawled under the sink with my eyeglasses and a flash light to find the model number. I searched for the model number on part select and received veery quickly. I just popped it in (less than a minute) and now everything is wonderful. Don't buy a new disposer (my wife wanted me to) buy the replacement part that is giving you trouble at PartSelect!

Lost or misplaced splash guard

  • Customer: Roger from Star City WV
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 6 people found this instruction helpful
What a snap just push it in and all is OK. Tried the generic one from Lowes didn,t work. This was great and cheap including shiping charge.

Splash guard kept popping up when disposer was used.

  • Customer: Helen from Clinton MS
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 3 of 4 people found this instruction helpful
Removed old splash guard by pulling it up and out of the disposer then pressed the new guard in place. It was a perfect fit.

Splash guard was worn out

  • Customer: Phyllis from Avon MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 4 people found this instruction helpful
Purchased new one and just put into the hole.

My Mother's Kenmore refrigerator had a burnt out light bulb in it.

  • Customer: Doug from Sammamish WA
  • Difficulty: Very Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 2 of 4 people found this instruction helpful
Trying to be pro-active, we logged onto this site and put in the model number of the refrigerator to see if there was a special light bulb that had to be purchased before we drove over to my Mother's to replace it. Our Kitchen Aid refrigerator takes seconds to replace with an appliance bulb purchased at a local hardware store. Her instructions say you must shut off the electricity, remove a plastic cover which was difficult to get off, then the bulb was an appliance bulb and not what was spelled out on the model instructions. We had ordered this special $5 plus $8 shipping fee which was ordered on the 14th of Nov and still hasn't arrived. After going to the hardware store and buying a $1.50 bulb we were done. We returned home and tried to cancel our order. Even talked to the manager only to be told that they could not cancel the order. I find that totally non customer friendly. Any retailer that we have ever dealt with has never been so inflexible. We were also told that we cannot return the part even though it will be unopened and unusable. To state on your instructions per the model number that you need this type of bulb when clearly it wasn't installed to begin with and then to refuse to cancel the order within 2 hours of placing the order and not even being shipped yet is ridiculous. Even the shipping email states: "Satisfaction Guaranteed
You may return an unused and uninstalled part in its original packaging. To return a part, you must first obtain a Return Authorization number by calling 800-366-PART or visiting our website at www.SearsPartsDirect.com. We must receive the returned part(s) with the Return Authorization number within 90 days of your original order date. Credit will be issued for the part(s) plus tax minus shipping charges. Your satisfaction is important to Sears." Every time we have had dealings with Sears for the last 26 years we have dealt with this type of crap. Whether it be employees who don't know the product or refusals to accept returns. Sears could learn something from Nordstroms. Personally, we will never buy anything from Sears again. We will also steer anyone we can away from making a purchase from Sears. I wouldn't buy from Sears even if it was the recommended buy from Consumer Reports simply because your customer service is the poorest we have ever dealt with and you never get any better. I honestly don't know how you stay in business. Even this email forces me to put in Splash Guard as the part used even though the part we ordered was a light bulb. I can't bring up that option. Figures!

Splash guard was too small and kept falling in

  • Customer: Hildegard from Camarillo CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
My order arrived in the mail in 2 days, I popped it in and it was a perfect fit. AAHH, what a relief not to have it fall in constantly!

Leaky GE Disposall

  • Customer: Donald from Tampa FL
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 3 of 8 people found this instruction helpful
Mount Ring was very difficult to remove. Hammer needed to unlock. Once removed, rubber and fiber gaskets were easily replaced. Cushion Mount did not attach properly to sink flange after many attempts, so Mount Ring was placed too high for hopper to attach. The cushion mount was finally placed on flange correctly (not sure why it attached incorrectly previously) but all is well with no leaks. Dishwasher hose needed to be re-attached after hopper mounted and locked in position.

worn splash guard

  • Customer: Thomas from Muscoda WI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 2 people found this instruction helpful
Removed used one and replaced with new one. Perfect fit no tools required. Suggestion: Always buy orgional manufacture's parts when possible. Then you know they will fit and work properly.

The splashguard on the disposall had deteriorated leaving a silver-dollar-sized hole.

  • Customer: R M from Bloomfield NE
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 3 people found this instruction helpful
The repair was simple. I removed the old splash guard and placed the new splash guard in. It took less than a minute. Absolutely no tools required.

Quick shipping too. I had the replacement part in 2 days.

Old guard brittle and broken fell into disposal and was disposed

  • Customer: James from Brandon MS
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 3 people found this instruction helpful
Removed new guard from package and slipped it right into place, no problems.

I lost the old splash guard

  • Customer: Keith from New Buffalo MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 4 of 13 people found this instruction helpful
I simply inserted the new splash guard in the opening

Splash guard had been replaced by faulty generic guard.

  • Customer: Laurel from Sunfish Lake MN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
Found the proper GE Splash Guard and slipped it
into place. The repair was a snap but finding the part was difficult until I found it on PartSelect.

Splash guard dropped from position and was caught by blades of disposal.

  • Customer: Thomas from Flinton PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
Simply removed the old splash guard which was partially destroyed and inserted the new one.

Replace water filter

  • Customer: Brenda from Lykens PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 1 people found this instruction helpful
Very simple to replace

splash guard worn out

  • Customer: thomas from drums PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 1 of 4 people found this instruction helpful
just put it in the drain
All Instructions for the GFC410-02
1-15 of 29