Models > GFC1000G02

GFC1000G02 General Electric Food Waste Disposer - Overview

Get Parts and Repair Help for GFC1000G02

If you know the food waste disposer repair part you need, you can browse the list of all parts on the GFC1000G02, or you can search by name or part description. You can also find your part by where it is located on the GFC1000G02 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your food waste disposer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the GFC1000G02 [Viewing 1 of 1]

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.62

STOPPER

This is a flexible rubber cover that fits over the top of the sink drain. It opens up in the middle and will allow you to feed water or food items into a garbage disposal while ke...

$8.32

Flange Gasket - Fiber

Sold individually.

$2.79

FLANGE GASKET

$10.46

CUSHION MOUNTING RING

$22.62

MOUNTING RING

$22.62

SINK FLANGE

$4.48

SUPPORT RING

$2.79

BRUSH MOTOR

TURNTABL ASM

$9.41

OUTLET GSKT

Common Symptoms of the GFC1000G02 [Viewing 1 of 1]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Leaky GE Disposall

  • Customer: Donald from Tampa FL
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 6 of 11 people found this instruction helpful
Mount Ring was very difficult to remove. Hammer needed to unlock. Once removed, rubber and fiber gaskets were easily replaced. Cushion Mount did not attach properly to sink flange after many attempts, so Mount Ring was placed too high for hopper to attach. The cushion mount was finally placed on flange correctly (not sure why it attached incorrectly previous... read more