Models > GFB1051G01 > Instructions

GFB1051G01 General Electric Food Waste Disposer - Instructions

All installation instructions for GFB1051G01 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the food waste disposer repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the GFB1051G01
1-1 of 1
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Leaky GE Disposall

  • Customer: Donald from Tampa FL
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 3 of 8 people found this instruction helpful
Mount Ring was very difficult to remove. Hammer needed to unlock. Once removed, rubber and fiber gaskets were easily replaced. Cushion Mount did not attach properly to sink flange after many attempts, so Mount Ring was placed too high for hopper to attach. The cushion mount was finally placed on flange correctly (not sure why it attached incorrectly previously) but all is well with no leaks. Dishwasher hose needed to be re-attached after hopper mounted and locked in position.
All Instructions for the GFB1051G01
1-1 of 1