Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GFB1051-01

GFB1051-01 Hotpoint Food Waste Disposer - Overview

Get Parts and Repair Help for GFB1051-01

If you know the food waste disposer repair part you need, you can browse the list of all parts on the GFB1051-01, or you can search by name or part description. You can also find your part by where it is located on the GFB1051-01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your food waste disposer. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the GFB1051-01

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$3.31

FLANGE GASKET

This is a flange gasket for a food waste disposer or garbage disposer. The gasket provides a seal between the sink opening and disposal flange. You may need to replace this gasket ...

$9.07

Flange Gasket - Fiber

This item is sold individually. The fiber sink flange gasket works with your food waste disposer. This part creates a seal that prevents any water from leaking. It is positioned between the sink flange and the disposal mounting ring. The flange may break apart over time and cause leaking and will need to be replaced. The flange gasket is donut shaped and is 4 inches in diameter. Before beginning this repair make sure the power to the food waste disposer has been disconnected. This is an OEM part that is obtained right from the manufacturer.

$11.33

CUSHION MOUNTING RING

$23.65

SINK FLANGE

The sink flange attaches to your sink drain opening and provides a connection to mount the disposal unit to the sink itself. If your food waste disposer is leaking, there are a few places that you should inspect. If the leak appears to be coming from around the connection to the sink, look carefully at the sink flange, as there could be an issue with the flange itself, or its gaskets. Remember to disconnect the power from your food waste disposal unit before beginning this repair. This OEM replacement part has an outer diameter of approximately 4.5 inches, and an inner diameter of approximately 3 inches.

$5.13

SUPPORT RING

$23.57

MOUNTING RING

This is a garbage disposal mounting ring, which is also known as a mounting bracket. It attaches the garbage disposal to the sink flange and helps create a watertight seal to prevent leaking. The ring is made entirely of metal, is metallic silver in colour, and is approximately 4.5 inches in diameter from outer edges. It is recommended to check the flange gasket in your garbage disposer before ordering this part in case the gasket is compromised. This is a genuine part sourced directly from the authentic manufacturer, and is sold individually.

$12.34

STOPPER

This stopper is designed for use with garbage disposals. If your disposal will not start, will not run properly, or is starting to smell bad, repairing it could be as simple as rep...

$8.18

DISCONTINUED

OUTLET ELBOW

TURNTABL ASM

Common Symptoms of the GFB1051-01

[Viewing 1 of 1]
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Leaky GE Disposall

  • Customer: Donald from Tampa, FL
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 8 of 15 people found this instruction helpful
Mount Ring was very difficult to remove. Hammer needed to unlock. Once removed, rubber and fiber gaskets were easily replaced. Cushion Mount did not attach properly to sink flange after many attempts, so Mount Ring was placed too high for hopper to attach. The cushion mount was finally placed on flange correctly (not sure why it attached incorrectly previous... read more