Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kurt
December 5, 2022
Won't spin, tube tries but Won't spin
For model number GCRH410H1WW
Hello Kurt, thank you for the question. Based on our research, we would recommend checking the following parts to fix your issue: drive belt, part number PS1990787, pulley, part number PS11766446, and drive motor, part number PS2373340. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!
There is a constant, intermittent beeping. When I press cancel it stops for a couple seconds and then it starts back up again.
For model number GCRH410H1WW
Hi Andrew, thank you for reaching out. Based on our research, we would recommend resetting the appliance by unplugging the power for 5 minutes. If the beep issue does not fix then you need to check the control panel, part number PS1151541, which may be faulty. We hope this sorts out your problem!
This is the second time in the same 7 year old appliance. Remove the front bottom cover by removing 2 screws. Then remove the 2 screws holding the pump down. Then unclip the electrical wire from the pump and remove both hoses from the pump by squeezing the spring clamps with a pliers. Have a pan to collect the water that will drain fr
... Read moreom the lines. Take the new pump and install it in reverse order from above.
I unclipped the old drawer parts from the broken drawer and replaced the old parts onto the new drawer and slid the whole drawer back in the washing machine. It took longer to type this that it did to repair the washer. No tools needed at all.
I paid a plumber $150 to replace this part a year ago. I simply took the screws out,ordered the part,paid for 1 day shipping, and screwed the new part on. The washer DID NOT WORK without this part,and worked perfectly the minute I replaced it.