Models
>
GCG1540F1SS
GCG1540F1SS General Electric Trash Compactor - Overview
Sections of the GCG1540F1SS
[Viewing 6 of 6]Manuals & Care Guides for GCG1540F1SS
Click to downloadKeep searches simple, eg. "belt" or "pump".
Compactor Bags - Package of 12
PartSelect #: PS258002
Manufacturer #: WC60X5017
Using trash compactor bags is a practical way to remove your waste. Because compactors use such high pressure to compress the waste, using compactor bags designed to handle the force are a necessity. ...
$176.28
In Stock
Power Nut Kit
PartSelect #: PS11747554
Manufacturer #: WP9870163
Includes everything pictured above.
$75.17
In Stock
Drive Gear Kit
PartSelect #: PS257882
Manufacturer #: WC36X5071
The drive gear is located at the bottom of your compactor and helps the drive motor power the ram by operating the chain that powers the compacting ram. If you notice that your drive gear is broken or...
No Longer Available
Container Handle
PartSelect #: PS257793
Manufacturer #: WC36X10036
Screws are sold separately.
No Longer Available
Bag Carrier
PartSelect #: PS257772
Manufacturer #: WC36X10015
This part holds the trash compactor bag to make taking out the trash without worrying about tearing the bag.
* This part also comes with the 2 handles.
No Longer Available
Questions And Answers for GCG1540F1SS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charlotte
January 10, 2023
Our Garbage compactor doesn't spring out as far as it use to, only about 4 inches. I thought maybe putting on a new spring would help. Do you think this would work and do you carry this part?
Charlotte Antaki
For model number GCG1540F1SS
Hello Charlotte, thank you for contacting us. We would recommend checking the chain drive, part number PS257884. According to our research, it is the most probable culprit. When the chain is damaged, it can get stuck and will not allow the compactor to move or reach its upper limit. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Common Symptoms of the GCG1540F1SS
[Viewing 2 of 2]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
trash compactor ram not moving - broken plastic drive gear
1) pulled the compactor from under the counter and unplugged it. 2) tipped it on its side 3) removed 5 screws (3 on the motor side and two on the bottom) an took off the bottom cover plate. 3) using the pliers i pulled of the retainer clip from the large drive gear(it had broken on only the hub remain attached) 4) i then just slid in the
... Read more
new gear, snapped in the retainer clip and buttoned up the cover plate. Note I did not replace the other parts that came in the package because the existing ones seemed ok.
Read less
Parts Used:
-
william from andover, MA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
16 of 22 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
locking nut was stripped
After calling a repair man and being told my appliance was to old for him to repair I discovered your website. I simply entered the model number and a picture of the part I was looking for was easily found. I ordered online and received the replacement parts 5 day's later. I simply swapped out the old locking nuts with the new ones from
... Read more
your website and the repair was complete. What could have been an easy $100 repair cost a fraction of that and the trash compactor is working just fine.
Read less
Parts Used:
-
Tim from Bigfork, MT
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
12 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
handle broke
My husband removed the old handle by unscrewing the 2 screws, and replaced it with the new handle, replacing the 2 screws. EASY
Parts Used:
-
CONNIE from MARANA, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
7 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!