Models > GCG1520Z0BB

GCG1520Z0BB General Electric Trash Compactor - Overview

Get Parts and Repair Help for GCG1520Z0BB

If you know the trash compactor repair part you need, you can browse the list of all parts on the GCG1520Z0BB, or you can search by name or part description. You can also find your part by where it is located on the GCG1520Z0BB by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$89.27

Compactor Bags - Package of 12

These bags will fit all fifteen inch rectangular trash compactors.

$77.09

Drive Gear Kit

$104.00

Rotary Switch Kit

$37.37

Power Nut Kit

This kit includes the power nut and 2 clips/washers. Screws/studs are sold separately.

$28.31

Rotary Knob

$8.75

SCREW 8-32 X 3/8

$85.43

Foot Pedal - Black

$80.95

SWITCH TOP LIMIT & DIR

$75.18

PANEL FRONT WH/BK

$58.73

Bag Carrier

This part holds the trash compactor bag to make taking out the trash without worrying about tearing the bag. * This part also comes with the 2 handles.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

trash compactor ram not moving - broken plastic drive gear

  • Customer: william from andover MA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 2 of 3 people found this instruction helpful
1) pulled the compactor from under the counter and unplugged it. 2) tipped it on its side 3) removed 5 screws (3 on the motor side and two on the bottom) an took off the bottom cover plate. 3) using the pliers i pulled of the retainer clip from the large drive gear(it had broken on only the hub remain attached) 4) i then just slid in the new gear, snapped in... read more

One of the nuts on the ram stripped out

  • Customer: kelton from weatherford TX
  • Difficulty: Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Socket set
  • 0 of 1 people found this instruction helpful
1)Pulled the unit out remove the top and bottom covers. 2)Disconnected the drive chain by removing the sproket from the motor. 3)Unscrewed the drive rod on the side that worked and removed the ram. 4)Reassembled and used the bin for trash while waiting for the part. 5)The nut came with clips included (this was not noted in the order but is vital) removed the... read more