Models > GBSC3HBXCRBB

GBSC3HBXCRBB General Electric - Overview

Get Parts and Repair Help for GBSC3HBXCRBB

If you know the repair part you need, you can browse the list of all parts on the GBSC3HBXCRBB, or you can search by name or part description. You can also find your part by where it is located on the GBSC3HBXCRBB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your . We’ve also included any installation videos we have for GBSC3HBXCRBB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$1.53

Compression Ring

$20.09

Run Capacitor

This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.

$7.27

Evaporator Fan Blade

$1.78

Lid Bumper

$2.87

Evaporator Fan Grommet - blue

$1.94

SCR 8-18 CA HX 1/2 S

$2.36

SET SCREW

$4.91

Light Socket

$9.50

SLIDE PAN RH

$27.77

Light Switch - 3 Terminal

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

No power to the fan and compressor

  • Customer: Christian from Kearneysville WV
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 78 of 107 people found this instruction helpful
I have a fridge in my garage. I have found that a glass of ice water or a cold drink outside is very important to me. When I discovered melting ice dripping onto the garage floor I was very upset. I spun the fridge and found that the compressor and fan weren't starting. I got out my multi-meter and discovered that power was not making it to these compon... read more

Sticking Light Switch

  • Customer: Jonathan from Lilburn GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 34 of 38 people found this instruction helpful
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the swi... read more

The refrigirator light would not come on.

  • Customer: Jania from Novato CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 9 of 11 people found this instruction helpful
Poped out with screwdriver the old swithch and unplugged the two wires. Plugged in the wires to the new swithch and pushed it back in the hole where the old switch was before. read more