Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GBS307PDQ12

GBS307PDQ12 Whirlpool Wall Oven - Overview

Get Parts and Repair Help for GBS307PDQ12

If you know the wall oven repair part you need, you can browse the list of all parts on the GBS307PDQ12, or you can search by name or part description. You can also find your part by where it is located on the GBS307PDQ12 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your wall oven. We’ve also included any installation videos we have for GBS307PDQ12 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Inner Door Glass

Glass ONLY.


Bake Element

This part is located at the bottom of the oven.


Oven Rack

Sold individually.



This screw is sold individually.


Thermal Overload Safety Thermostat

This part establishes and maintains the internal temperature of the oven cavity.


Light Bulb - 120-130V - 15W

Sold individually.


Broil Element

This broil element is found on the roof of the oven.


Temperature Sensor

This temperature sensor detects the temperature within the oven cavity.


Touch-Up Paint - White



Spray Paint - 12 oz. - White

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broke the glass panel inside the oven door -- dropped a baking dish on the glass!

  • Customer: Robert from Wildwood, MO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 140 of 177 people found this instruction helpful
Easily removed the door from the oven by releasing clips attached to the door hinge -- very nicely engineered. Removed about 6 philips head screws to allow the door assembly to be taken apart for access to the glass. Lifted out the broken glass, cleaned the inside of the door, installed the new glass, reassembled the door (a two minute project), and reatt... read more

No heat after cleaning oven

  • Customer: Frederick from St. Louis, MO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 92 of 101 people found this instruction helpful
This built-in oven was slid out of it's space and set on a box. I removed the back cover with nut driver and located the safety overload device. removed nuts and used pliers to remove wires and replace them. The power must be off to do this repair.Replaced the cover and slid back into place. This could be a lot more difficult if your power cord or gas line ... read more

I broke the Bake Element while cleaning the oven.

  • Customer: Daniel from Cheraw, SC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 44 of 53 people found this instruction helpful
I removed the two screws that held the bake element in place. Next I removed the Bake Element. I had to unscrew the oven to go behind it because when one piece off of the element broke, it slide back behind the oven. I pushed the wire back thru the piece holes, connected the Element, and pushed the element with the wires back through the holes. I rescrewed t... read more