Models > GBD309PVB02

GBD309PVB02 Whirlpool Oven - Overview

Get Parts and Repair Help for GBD309PVB02

If you know the oven repair part you need, you can browse the list of all parts on the GBD309PVB02, or you can search by name or part description. You can also find your part by where it is located on the GBD309PVB02 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. We’ve also included any installation videos we have for GBD309PVB02 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$46.96

Inner Door Glass

$36.04

Oven Rack

Sold individually.

$56.33

Thermostat

Also known as Thermal cut-off (fuse). This part establishes and maintains the internal temperature of the oven cavity.

$63.84

Temperature Sensor

This temperature sensor detects the temperature within the oven cavity.

$3.86

Touch-Up Paint - White

$2.70

Screw

This screw is sold individually.

$19.04

Terminal Block

It provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).

$176.30

Exterior Door Glass - Stainless

$84.07

Blower Motor Assembly

$17.55

BULB-LIGHT

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Self Cleaning blows the thermostat fuse

  • Customer: Joseph from Worthington PA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 53 of 57 people found this instruction helpful
Something Kitchen Aid wont tell you but running a self clean on this model stove blows the fuse located on the back of the stove.

First I slid the stove out and removed the back of the stove held in place by 8 Phillips screws. The thermostat fuse is located near the top middle on the back of the stove. Remove the 2 screws holding it in place. Dis... read more

Broke the glass panel inside the oven door -- dropped a baking dish on the glass!

  • Customer: Robert from Wildwood MO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 53 of 71 people found this instruction helpful
Easily removed the door from the oven by releasing clips attached to the door hinge -- very nicely engineered. Removed about 6 philips head screws to allow the door assembly to be taken apart for access to the glass. Lifted out the broken glass, cleaned the inside of the door, installed the new glass, reassembled the door (a two minute project), and reatt... read more

Front glass broke on the oven door

  • Customer: Ian from Shoreview MN
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 37 of 37 people found this instruction helpful
The glass broke after I took the oven door off to tighten the handle which had become lose.....There are 4 screws and one of th 4 had come out , hence the lose handle....So I tightened the 4 screws which were in a metal bracket only to find out under all the foil wrap was glass, and by tightning the screws they fractured the glass into a million little shard... read more