Models > GBD307PDB5

GBD307PDB5 Whirlpool Oven - Overview

Get Parts and Repair Help for GBD307PDB5

If you know the oven repair part you need, you can browse the list of all parts on the GBD307PDB5, or you can search by name or part description. You can also find your part by where it is located on the GBD307PDB5 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your oven. We’ve also included any installation videos we have for GBD307PDB5 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$46.96

Inner Door Glass

$42.96

Bake Element

$36.04

Oven Rack

Sold individually.

$5.54

Touch-Up Paint - White

$37.04

Thermal Overload Safety Thermostat

This part establishes and maintains the internal temperature of the oven cavity.

$24.55

Light Bulb - 120-130V - 15W

Sold individually.

$47.08

Thermostat

Also known as Thermal cut-off (fuse). This part establishes and maintains the internal temperature of the oven cavity.

$18.07

2 Piece Broiler Pan

$39.59

Door Hinge

$63.84

Temperature Sensor

This temperature sensor detects the temperature within the oven cavity.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Self Cleaning blows the thermostat fuse

  • Customer: Joseph from Worthington PA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 58 of 62 people found this instruction helpful
Something Kitchen Aid wont tell you but running a self clean on this model stove blows the fuse located on the back of the stove.

First I slid the stove out and removed the back of the stove held in place by 8 Phillips screws. The thermostat fuse is located near the top middle on the back of the stove. Remove the 2 screws holding it in place. Dis... read more

Broke the glass panel inside the oven door -- dropped a baking dish on the glass!

  • Customer: Robert from Wildwood MO
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 64 of 87 people found this instruction helpful
Easily removed the door from the oven by releasing clips attached to the door hinge -- very nicely engineered. Removed about 6 philips head screws to allow the door assembly to be taken apart for access to the glass. Lifted out the broken glass, cleaned the inside of the door, installed the new glass, reassembled the door (a two minute project), and reatt... read more

No heat after cleaning oven

  • Customer: Frederick from St. Louis MO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 40 of 46 people found this instruction helpful
This built-in oven was slid out of it's space and set on a box. I removed the back cover with nut driver and located the safety overload device. removed nuts and used pliers to remove wires and replace them. The power must be off to do this repair.Replaced the cover and slid back into place. This could be a lot more difficult if your power cord or gas line ... read more