Models > GB6525PEAW1

GB6525PEAW1 Maytag Refrigerator - Overview

Get Parts and Repair Help for GB6525PEAW1

If you know the refrigerator repair part you need, you can browse the list of all parts on the GB6525PEAW1, or you can search by name or part description. You can also find your part by where it is located on the GB6525PEAW1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for GB6525PEAW1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$3.76

Ladder Hook

Sold Individually.

$2.70

Screw

Sold individually.

$2.70

Screw

This screw is sold individually.

$18.45

Light Switch

$5.25

Touch-Up Paint - White

$52.09

Crisper Pan

$23.93

Drain Tube Kit

Also known as a duck bill. This kit includes the tube extension piece and spacer.

$41.71

Freezer Door Handle

The screws for this white handle are sold seperately.

$16.41

Light Switch - 2 Terminal

$70.84

Crisper Glass

Glass Only. Frame sold separately.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

while closing the door, the light switch fouled, resulting in the switch breaking

  • Customer: Kevin from Beckley WV
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 20 of 23 people found this instruction helpful
I used a flat screwdriver and released the lock tab on the bottom of the light switch, and pried the switch out, being careful to not damage the plastic around the mounting place of the switch, unplugged wiring from old switch, plugged in the new one and pushed the new switch into place. Job finished light switch now working. read more

Light Switch broke

  • Customer: James Richard from St. Cloud MN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 14 of 16 people found this instruction helpful
An easy job for smaller hands. Removed the two bolts holding the light cover. Removed two electrical connections from the old switch by pinching the retaining clip,removed the switch, snapped in the new one and re-attached the connectors. Your online illustrations helped me to know that the plastic housing for the light switch would only swing down so far an... read more

replace plastic wheels on refridgerator

  • Customer: robert from oak forest IL
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Socket set
  • 16 of 23 people found this instruction helpful
I used board levers to do one side at a time.Kinda tricky, but you can hoist up fridge high enough to replace wheels. take your time think it out and be safe . Make sure you use saftey boards to support load to protect yourself==good luck A small mirror may help to see how the rollers alien in the supports. read more