Models > GB6525PEAS1

GB6525PEAS1 Whirlpool Refrigerator - Overview

Get Parts and Repair Help for GB6525PEAS1

If you know the refrigerator repair part you need, you can browse the list of all parts on the GB6525PEAS1, or you can search by name or part description. You can also find your part by where it is located on the GB6525PEAS1 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for GB6525PEAS1 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$25.82

Center Crisper Rail - White

This is the center support rail for the refrigerator crisper drawer. This rail supports center of the crisper frame.

$4.64

Screw

Sold individually.

$4.41

Ladder Hook

Sold Individually.

$23.47

P-Trap Drain Tube Kit

Also known as a duck bill. This kit includes the tube extension piece and spacer.

$18.84

Light Switch

This part turns on the light when the door is opened.

$2.70

Screw

This screw is sold individually.

$41.68

Freezer Door Handle

Screws NOT included.

$4.05

SCREW

Sold individually.

$18.38

Fan Blade

Used with Evaporator Fan Motors.

$5.05

Touch-Up Paint - White

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

while closing the door, the light switch fouled, resulting in the switch breaking

  • Customer: Kevin from Beckley WV
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 28 of 33 people found this instruction helpful
I used a flat screwdriver and released the lock tab on the bottom of the light switch, and pried the switch out, being careful to not damage the plastic around the mounting place of the switch, unplugged wiring from old switch, plugged in the new one and pushed the new switch into place. Job finished light switch now working. read more

Light Switch broke

  • Customer: James Richard from St. Cloud MN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 21 of 23 people found this instruction helpful
An easy job for smaller hands. Removed the two bolts holding the light cover. Removed two electrical connections from the old switch by pinching the retaining clip,removed the switch, snapped in the new one and re-attached the connectors. Your online illustrations helped me to know that the plastic housing for the light switch would only swing down so far an... read more

Scratches in Surface

  • Customer: Michelle from Richardson TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 15 of 17 people found this instruction helpful
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great. read more