Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GB1924PEKB3

GB1924PEKB3 Whirlpool Refrigerator - Overview

Get Parts and Repair Help for GB1924PEKB3

If you know the refrigerator repair part you need, you can browse the list of all parts on the GB1924PEKB3, or you can search by name or part description. You can also find your part by where it is located on the GB1924PEKB3 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for GB1924PEKB3 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Manuals & Care Guides for GB1924PEKB3

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$30.17

Center Crisper Rail - White

This is a center crisper rail for your refrigerator. This part acts as a support rail for the crisper drawer by holding the center of the crisper frame. You will need to replace th...

Order within the next 29 mins and your part ships today!
$25.16

P-Trap Drain Tube Kit

The p-trap drain tube kit may also be known as the duck bill, or the drain pipe, and it is compatible with your refrigerator. The function of the p-trap drain kit is to carry the water that has formed during the defrost cycle to the bottom of the refrigerator, where your drain pan is located. The tools you will need for this repair include a 1/4-inch nut driver and a small flat-blade screwdriver. To do this repair you will need to pull the refrigerator forward in order to reach the lower access panel at the back. This kit includes the tube extension piece and spacer.

Order within the next 29 mins and your part ships today!
$22.07

Light Switch

This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is t...

Order within the next 29 mins and your part ships today!
$5.52

Screw

Sold individually.

Order within the next 29 mins and your part ships today!
$48.41

Freezer Door Handle

This is a door handle for your refrigerator or freezer, which allows you to easily open and close the door. Take note that the screws are not included when you order this part; you...

Order within the next 29 mins and your part ships today!
$4.87

Screw

Sold individually.

Order within the next 29 mins and your part ships today!
$4.89

Deli Drawer Glide - Right Side

Order within the next 29 mins and your part ships today!
$5.41

Glide - Left Side

Order within the next 29 mins and your part ships today!
$30.23

Fan Blade

Used with Evaporator Fan Motors.

Order within the next 29 mins and your part ships today!
$19.63

Light Switch - 2 Terminal

The light switch terminal is used in refrigerators and freezers to help you see inside your appliance by turning on when the fridge door is open and turning off when the door is closed. The measurements of this part are: 1.12 inches in length, 1 inch in width, 1.75 inches in height and 0.026 pounds in weight. If your light switch terminal is damaged or the light does not turn on when fridge door is open, replacing the light switch terminal can solve the problem. As a safety precaution, remember to unplug your fridge from the power source before beginning this installation project. Refer to the manual provided by the manufacturer for further installation instructions and a detailed guide.

Order within the next 29 mins and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Cracked & Snapped Center Crisper Rail

  • Customer: Ruth from Roxbury, MA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 167 of 176 people found this instruction helpful
A very easy fix took all of five minutes read more

while closing the door, the light switch fouled, resulting in the switch breaking

  • Customer: Kevin from Beckley, WV
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 45 of 56 people found this instruction helpful
I used a flat screwdriver and released the lock tab on the bottom of the light switch, and pried the switch out, being careful to not damage the plastic around the mounting place of the switch, unplugged wiring from old switch, plugged in the new one and pushed the new switch into place. Job finished light switch now working. read more

Light Switch broke

  • Customer: James Richard from St. Cloud, MN
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 24 of 27 people found this instruction helpful
An easy job for smaller hands. Removed the two bolts holding the light cover. Removed two electrical connections from the old switch by pinching the retaining clip,removed the switch, snapped in the new one and re-attached the connectors. Your online illustrations helped me to know that the plastic housing for the light switch would only swing down so far an... read more