Quick Question!

Have you ever purchased from PartSelect.com before?

Models > GA3171SXAW

GA3171SXAW Admiral Range - Overview

Get Parts and Repair Help for GA3171SXAW

If you know the range repair part you need, you can browse the list of all parts on the GA3171SXAW, or you can search by name or part description. You can also find your part by where it is located on the GA3171SXAW by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for GA3171SXAW parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$16.43

Top Burner Igniter

This top burner igniter comes with a mounting bracket.

$68.81

Door Handle

Handle only.

$22.26

SWTCH-LITE

$4.94

Wing Nut

Rubber Door Spacer

Sold Individually. This spacer has adhesive on one side. This spacer is used between door panels of ranges and ovens.

GLASS-DOOR

Bottom Trim Piece - black

This trim piece is twenty-nine and a half inches long and an inch and a half wide. It is all black in color and is made of plastic.

SCREW (BLK)

BURNER- OV

RACK- BROI

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

gas burner ignitor failure

  • Customer: roy from East Providence, RI
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 97 of 110 people found this instruction helpful
Lift out sealed burner assembly rear of stove first while careully sliding to rear to disengage ignitor probes.Remove philips head screws from bottom sheet metal housing to expose bottom of burners Remove gas tube assembly screws and move tube away carefully.Unplug wires from ignitor.Remove screws for ignitor .Remove ignitor, I noticed that rust and dirt ha... read more

Burner wouldn't start

  • Customer: Yury from Brooklyn, NY
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 29 of 42 people found this instruction helpful
Make a quarter turn counterclockwise, disengage a burner head, disconnect 2 wires, connect to a new head, install turn clockwise.

That's it! read more

worn out door seal

  • Customer: Stella from Charlotte, TN
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers
  • 22 of 23 people found this instruction helpful
removed old clips and remaining parts of old seal...new part already had clips attached, so just snapped them into holes in oven door. read more