Models > G7CG3665XS00 > Instructions

G7CG3665XS00 Whirlpool Cooktop - Instructions

All installation instructions for G7CG3665XS00 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the cooktop repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the G7CG3665XS00
1-4 of 4
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

new countertops required remounting the gas cooktop

  • Customer: Raymond from Allen TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 1 of 1 people found this instruction helpful
A very simple repair.
I inserted the brackets and screwed them in position

I wanted a second 8" canning element for home canning

  • Customer: Shelley from Powell WY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 3 of 7 people found this instruction helpful
I purchased an 8" canning element for my new Kenmore Stove. The ordering process was easy. I printed my order out. I did not receive a confirmation by email, however I received the part in a timely manner. I was satisfied with the process.

stove top got hot when using large pans

  • Customer: Albert from Bryant SD
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Removed the existing element and replaced it with the new one.

Gas explosion due to bad Gas Pressure Regulator

  • Customer: Charles from Buena Park CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
First step is to turn gas off to cook top and also disconnect power to the unit. Than using a crescent wrench disconnect the gas line going to the unit from the Regulator. Than again using the crescent wrench disconnect the regulator from the bottom of the unit. Next remove the nipple that connects the gas line to the regulator from the old unit. Apply new pipe dope to the threads and screw it into the new one and tighten down. Next install the regulator to the unit and install the gas line to the regulator. once done with the install you can now plug the unit in and turn on the gas. You are now ready to use the cook top again
All Instructions for the G7CG3665XS00
1-4 of 4