Models > G7CG3064XB00

G7CG3064XB00 Whirlpool Cooktop - Overview

Get Parts and Repair Help for G7CG3064XB00

If you know the cooktop repair part you need, you can browse the list of all parts on the G7CG3064XB00, or you can search by name or part description. You can also find your part by where it is located on the G7CG3064XB00 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$2.70

Screw

This screw is sold individually.

$17.20

KNOB

$4.60

Grommet

This is not a pad or foot for the bottom of the grate. This grommet goes behind the knob.

$16.99

Knob - Black

This knob accepts a D shape shaft. Sold individually.

$70.13

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

$66.77

Delta Frame Canning Element - 8"

This canning element is typically used for Whirlpool/Kenmore brand electric ranges. This element has a 3/4 raised frame for additional support, 5 turns, and carries 2600 watts. It also comes with an infinite switch.

$5.39

CLEANER

$28.36

Gas Valve/Switch Seal Cover

Part is located on top of the igniter switch that's next to the gas valve. Helps regulate gas flow and the amount of normal leakage that may occur.

$7.83

USE MCN TJ128

$72.86

Gas Pressure Regulator

This valve automatically cuts off the flow of gas when it reaches a certain pressure.

Common Symptoms of the G7CG3064XB00 [Viewing 1 of 39]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Top burners would not light. No "clicking" .

  • Customer: Carolyn from Bellingham MA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 12 of 15 people found this instruction helpful
My husband and I replaced the igniter module, following directions we found online. We removed the old one, replaced it with the new one, and thankfully everything is working great! read more

gas burners would not automatically light when gas turned on

  • Customer: MICHAEL from LONGVIEW TX
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 7 of 8 people found this instruction helpful
I went online and discovered the repair method and schematic of the range. I removed the spark module after first removing the upper rear panel cover and replaced with the new part module ordered from your company and now the spark module operates all the gas elements when they are turned on thus lighting the gas burners. My mother in law was thrilled, as sh... read more

Spark Module malfunction, won't spark

  • Customer: Darrel from Kewaunee WI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 5 of 7 people found this instruction helpful
Removed back upper cover, unscrewed retaining screw from module. As noted in a comment from another do-it-yourselfer, I replaced screw with a longer one and reinstalled module. Note that the replacement part is not exactly the same as the old one(the wires are located differently), I noted the wire color codes with the slot number and reinstalled them in t... read more