Quick Question!

Have you ever purchased from PartSelect.com before?

Models > G3287XRA

G3287XRA Maytag Range - Overview

Get Parts and Repair Help for G3287XRA

If you know the range repair part you need, you can browse the list of all parts on the G3287XRA, or you can search by name or part description. You can also find your part by where it is located on the G3287XRA by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for G3287XRA parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the G3287XRA

[Viewing 4 of 4]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$31.07

Flat Style Oven Igniter Kit

The flat style gas oven igniter included in this kit has a body length of 3-3/4 inches. This kit comes with all of the pieces you need to replace longer ceramic igniters, though th...

$16.02

Push-Button Clock Knob

$4.47

Screw

This screw is sold individually.

$22.26

SWTCH-LITE

$21.84

Twist-Style Clock Knob

Sold individually.

$146.61

Oven Safety Valve

This safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range.

Rubber Door Spacer

Sold Individually. This spacer has adhesive on one side. This spacer is used between door panels of ranges and ovens.

Single Drawer Glide

Exterior Door Glass - Black

Broiler Drawer Glide

This broiler drawer glide is less than an inch long. It is all black in color and is made of plastic. This glide is used with a gas range's track to help the broiler drawer glide in and out easily.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven would not work but the Broiler did

  • Customer: James from Ferndale, MI
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set
  • 248 of 274 people found this instruction helpful
The oven had been working intermittently for a while and after repeated threats of starvation from my spouse I finally took a look even though it was summer and the grill was working fine. The Igniter would glow red when the oven was turned on but the gas would not flow to it no matter what the temperature setting. I searched online and found this site that ... read more

Oven would'nt light

  • Customer: Charles from Charlestown, RI
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 93 of 102 people found this instruction helpful
In most cases if your oven won't light or takes a long time to light you may have a bad igniter even if it glows. To check the igniter use a voltmeter to check for 120 A/C volts going to the igniter and3.5 A/C volts going between the ingniter and the gas valve. My bad ingniter glowed but had only only 3.0 A/C volts going to the gas valve for the oven. The ne... read more

oven failed to light

  • Customer: Beryl from Dawsonville, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 47 of 50 people found this instruction helpful
My son replaced the broiler igniter this spring, so I had a clue as to what was required. This was even easier and since I had back surgery recently & my husband was out of town that was a giant plus!

I unplugged the oven, removed the oven door, found the release latch and removed the oven floor. I then removed the 2 screws that held the ignit... read more