Models > G32526PEKS

G32526PEKS Maytag Refrigerator - Overview

Get Parts and Repair Help for G32526PEKS

If you know the refrigerator repair part you need, you can browse the list of all parts on the G32526PEKS, or you can search by name or part description. You can also find your part by where it is located on the G32526PEKS by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for G32526PEKS parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

$19.18

Pantry End Cap - Left Side

$18.84

Pantry End Cap - Right Side

$14.51

Center Rail

This is the center support rail for the refrigerator crisper drawer.

$32.98

USE WPL 67005899

$3.76

Crisper Frame Support

Note: If the wall anchor that this piece mounts on is broken, then the support is needed. (Order per Model#)

$2.70

Screw

This screw is sold individually.

$86.33

Crisper Frame

Glass NOT included.

$15.05

Water Fill Cup and Bearing

$2.70

Screw

This screw is sold individually.

$18.45

Light Switch

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Freezer is cold, Refridgerator is not as cold as it should be

  • Customer: Russell from Hardinsburg KY
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers
  • 179 of 213 people found this instruction helpful
Having seen this problem before in other equipment so I had an idea where to look. Problem: the automatic defrost function was not operating. Looking through openings in the back panel of the freezer compartment, you could see the evaporator coils and fins were a solid chuck of ice. There are three logical components to check. Heater element, thermostat ... read more

The poorly designed deli drawer lid tab broke off

  • Customer: Tim from Littleton CO
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 103 of 114 people found this instruction helpful
Removed the fruit & veggie drawers & the deli (pantry) drawer. Took out the 3 screws, removed the attached parts, put them on the replacement part, reattached it and put the drawers back in.

Here's the part I want to share: PartSelect had a expanded diagram showing the correct part and sufficiently detailed to figure out the repair before the pa... read more

defroster mode was not working causing freezer to ice up and refrigerator to be warm. Also fan was running continuely

  • Customer: James from Welches OR
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 90 of 99 people found this instruction helpful
The hard part for me was figuring out which part was causing the problem. I read what others had done and followed their test methods. I checked the defroster heater for continuity and the defroster thermostat to make sure it was closing. the defroster termostat has to be cold to check it. You will need to check it while it is in ice or take it out and put i... read more