Quick Question!

Have you ever purchased from PartSelect.com before?

Models > G32026PEKS

G32026PEKS Maytag Refrigerator - Overview

Get Parts and Repair Help for G32026PEKS

If you know the refrigerator repair part you need, you can browse the list of all parts on the G32026PEKS, or you can search by name or part description. You can also find your part by where it is located on the G32026PEKS by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for G32026PEKS parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$22.85

Pantry End Cap - Left Side

The pantry end cap is also known as a drawer support or a door shelf trim. This specific piece is sold individually and is meant for the left side of your refrigerator. It snaps in...

$73.61

Pantry Drawer Lid

This pantry drawer lid is also known as a pantry drawer door or pantry drawer cover. This is a genuine OEM part, and is sold individually. This part helps keep everything inside the drawer. It acts as a cover, and also keeps your drawer at the proper temperature by creating a seal. You may need to replace this part if door does not open or close, or if the drawer is too cold. No tools are required for this replacement, simply push the hinge pins aside to remove the old lid. Consider checking the pantry end cap kit for damage before ordering the pantry drawer lid, as they are often purchased together.

$60.26

Crisper Drawer

The crisper drawer in your refrigerator is used for storing various items. If you notice that your current crisper drawer is damaged, you may need to replace it. You may notice tha...

$3.02

Screw

This screw is sold individually.

$5.52

Screw

Sold individually.

$22.07

Light Switch

This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light when your fridge door is open, and to make sure it is off when your refrigerator door is closed. The reason you would need to replace this part is if your light is not turning on when your door is open. For this repair, you will need a putty knife, and a small flat-blade screwdriver.

$43.20

Kickplate Grille - Black

This kickplate grille is attached to the bottom of the refrigerator.

$4.89

Screw

Sold individually.

$29.94

Fan Blade

Used with Evaporator Fan Motors.

$32.03

Thermistor

Long harness thermistor kit.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Freezer is cold, Refridgerator is not as cold as it should be

  • Customer: Russell from Hardinsburg, KY
  • Difficulty: A Bit Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Screw drivers
  • 293 of 355 people found this instruction helpful
Having seen this problem before in other equipment so I had an idea where to look. Problem: the automatic defrost function was not operating. Looking through openings in the back panel of the freezer compartment, you could see the evaporator coils and fins were a solid chuck of ice. There are three logical components to check. Heater element, thermostat ... read more

defroster mode was not working causing freezer to ice up and refrigerator to be warm. Also fan was running continuely

  • Customer: James from Welches, OR
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 149 of 170 people found this instruction helpful
The hard part for me was figuring out which part was causing the problem. I read what others had done and followed their test methods. I checked the defroster heater for continuity and the defroster thermostat to make sure it was closing. the defroster termostat has to be cold to check it. You will need to check it while it is in ice or take it out and put i... read more

Top unit was not getting cold

  • Customer: Gregory from Lexington, SC
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 129 of 146 people found this instruction helpful
First thing to do is take two screws off where the door closes.I removed the light sheild off by pushing it to back of refrig.The most hardest part is removing the complete panel,I took a small flat blade scraper to ply down to get small access than you need to put alot of pressure to start getting the panel to start coming off there are alot of pegs to free... read more