Models > FUF20DMCRWH > Instructions

FUF20DMCRWH General Electric Freezer - Instructions

All installation instructions for FUF20DMCRWH parts

These instructions have been submitted by other PartSelect customers and can help guide you through the freezer repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the FUF20DMCRWH
1-2 of 2
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

freezer kept icing up on the coils would only get down to 20 degrees.

  • Customer: Jerry from Elverta CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 3 people found this instruction helpful
unplug the freezer. remove the 2 screws holding the timer, unplug the electrical fitting w/4 prongs. reverse the steps and you are done.

The freezer door was catching when opened and frost was building inside telling me that the seal wasn't good.

  • Customer: Paulette from Great Falls MT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 1 of 2 people found this instruction helpful
I called the local GE dealer for repair. The repair person arrived and told me that he could not get the part. The freezer was too old. Then he charged me $60 for coming out. I went online and did a search for parts with the model number above. I found Partselect.com and the diagrams showed which part I needed. It was in stock and I ordered it. My husband and I removed the door to the freezer, pushed the part into the hole at the bottom of the door and put the door back on its hinges. It works perfectly. Thank you.
All Instructions for the FUF20DMCRWH
1-2 of 2