This is a range temperature sensor, used to detect the interior temperature of your oven when it is baking or cooking. If you notice your oven is baking unevenly or at inconsistent temperatures, will ...
This is a dual element switch that is made for use within Samsung ranges. This switch is necessary to turn the heating elements on and off, and control how hot they get. Over time and with more freque...
This is a high limit thermostat designed for microwaves, ranges and ovens. Made of plastic and metal, this thermostat is designed to open the electrical circuit for your appliance when it reaches a sp...
This rubber cushion is supplied by the original manufacturer and has a shaft approximately 1 inch long. The cushion acts as a layer of protection between the oven door and oven frame/cavity. It preven...
This stainless steel wire rack is a sturdy platform for baking or roasting food, making sure heat circulates evenly. It measures approximately 7/16 inches by 24 3/4 inches and is usually found inside ...
This terminal block assembly is designed for use within various models of ranges and is sold as an individual OEM part without any other hardware included. Terminal blocks are responsible for receivin...
$85.05
In Stock
Questions And Answers for FTQ352IWUX
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dzmitry
January 20, 2020
What error e5 means? Thanks
For model number FTQ352IWUX
Hello and thank you for writing.
An SE/5E error message on the display of a Samsung ceramic hob means the control panel sensor has been on for too long. We hope this helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
Athena
November 18, 2022
Can you please tell me what the sensor reading of E 28 means
For model number FTQ352IWUX
Hello Athena, thank you for your question. E 28 means issues with the temperature sensor PS4240743. Unplug the main oven from the switch and disconnect the temperature sensor and ensure that the resistance is 1080 ohms. If the resistance is on the higher side, you should consider the replacement of the sensor. We have a video of how to replace it on our site. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Linda
February 4, 2023
Dual element does not get respond when I turn the temperature down.
For model number FTQ352IWUX
Hi Linda, thank you for reaching out. The issue appears to be with the Dual Element Switch and you may need to replace it, the part number is PS4240803. It turns the surface element on and off and controls how much heat the element produces. We hope this sorts out your problem!
I took off the back cover after I looked at youtube similar problems. Then removed the little thermostat and un hooked the 2 wires. I looked up the part and after is was delivered couple days later I connected the 2 wies and after putting the back cover on the oven was back to normal. Was such an easy repair and the part was only $11.