Models > FRS6LR5EM2 > Instructions

FRS6LR5EM2 Frigidaire Refrigerator - Instructions

All installation instructions for FRS6LR5EM2 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the FRS6LR5EM2
526-540 of 805
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

meat shelf was broke

  • Customer: michael from kennewick WA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
got the new one replased it and it was easy plus im certified in majjor apliences

support broke

  • Customer: Lisa from Mena AR
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
just put it in the old hole. the hard part was getting the old one out. you have to poke the center piece in to remove. otherwise you will break your fridge. then you have to to pull the center piece out before you put new in.

water dispenser actuator broken

  • Customer: Gopal from GALLOWAY OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
just follow the instructions.

refrigerator staying to warm

  • Customer: nicole from chipley FL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
husband did it took only a few min part was easy to find

Snapping sound on refrigerator door side when opening and closing door.

  • Customer: Juan from El Paso TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Unscrewed the top hinge, lifted door and laid it down. Took off old hinge bearing and snapped new one in. Put door back and no more noise. Easy fix. Only problem was that I couldn't believe I waited so long to fix that simple problem.

water valve leak

  • Customer: Donald from Wilmington NC
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Easy to assemble after cutting original water line fittings off. Use sharp knife to keep from damaging end of water lines.

broken suport for pam

  • Customer: JORGE from HOUSTON TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
take of the tray & take parts out & installed the new ones

One side of door shelf bin broke.

  • Customer: Janeen from Houston TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I originally ordered the wrong part (for the freezer side). Received the part on Saturday--I had ordered on Thursday afternoon. Discovered my error and got on line to see how to return and ordered the correct part. This part came on Tuesday morning. I put the part on the door and was finished in no time! Great service and easy return for my wrong order. Thanks.

The bottom door bin broke

  • Customer: Linda from Saint Albans WV
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Just popped it in..didn't fit really well...had to force it some what which I didn't like but same drawer. Good to go.

Bottom bin on door broke

  • Customer: Larry from Livingston TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Replaced bin in door. Noi tools needed

Not getting cold in lower Refrigerator

  • Customer: Charles from Wallingford CT
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Watch the video provided by PartSelect and did exactly the same percedure. Shows what screws to remove and how to remove and replace the part. The freezer compartment was iced up quite a bit so defrosted it before installing part.

Bottom hinge for refrigerator door was broken/missing

  • Customer: Frederick from Shepherd MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
simply took the screws out of the top of the door(after first emptying the door), picked it up off the bottom support and laid it on the counter. Used a needle nose pliers to remove what was left of the bottom bearing and replaced it with the new bearing. Placed it back on the support and put the top door mount back where it belonged. replaced the plastic hinge cover and it was as good as new. Really very simple.

door bin broke, door gasket damaged.

  • Customer: James from Celoron NY
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
simply put new bin on the door. removed door and popped on the new gasket. 30 min. total. service from partselect was very good.

The Plastic Tabs that hold the shelves are too thin/small

  • Customer: Cheryl from Huntsburg OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
The shelve bin tabs broke because they don't snap in properly so they get knocked out occasionally. They hit the floor and if what's in the door is heavy and lands on them they break. Snapping in a new one is not a problem, it's ordering/paying/shipping/waiting. They need re-designed so they fit more securely.

broken crisper drawer

  • Customer: MORGAN from ARCADIA LA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
just pull out broken crisper, and push in new crisper drawer.
All Instructions for the FRS6LR5EM2
526-540 of 805