FRS6LF7JW3 Frigidaire Refrigerator - Instructions

just installed new shelf

Your video tutorial was great just did what it said to do. Your service in mailing parts was awesome. Thanks so much!

I ordered the part from PartSelect and the order was procesed promptly. I installed the shelf and everyting is back to normal. Thanks!

I watched the step by step video. I t was a breeze. Thanks for the fast service and number 1 video to show me how to install

When I was moving the refrig. handles from one side to the other...I broke one of the mounts. It was SO easy to order from this place, and they ship IMMEDIATELY. Second time I have used them, and am VERY impressed.

Pulled fridge away from wall and unplugged. Turned off main water supply feed and removed fitting from water inlet valve. Took off back panel by removing 3 screws. Took out 2 screws holding valve to fridge. Pulled off color coded wire clips. Unscrewed each water tube connector. New valve had quick connectors so had to snip off flared ends of tubing with utility knife. Pushed tubing firmly into new valve fittings and pulled to ensure connection. Reattached wiring and reattached valve to fridge with the 2 screws. Reconnected water feed line and turned on main water feed. Checked for leaks before replacing back panel. Done. No more dripping from water dispenser.

It went okay. My husband did the job and he is handy. We both watched the little "How to" video and that was very helpful.

I just popped the plastic bin right into place. It was so easy it took me less than 5 mins

Had one other person, so putting the door back was easier. Repair went as told. Could do it myself.

Had to pry the old one from the cabinet. Had to work remaining piece evenly as to not crack the cabinet of the fridge. Not the best design on Frigidaire's part but it was fixable. Thanks for stocking every part under the sun.

Removed old one inserted new one . 15 seconds was done

Removed shelf and rails. Removed screws from the sides. Removed old broken rails. Mounted replacement rails and secured with screws. Mounted shelf back in refrigerator. Important!! Sanded down the rough edge of the original tray which had cut through the plastic rails. then I lubricated the sides with a small amount of lithium grease.Mounted the drawer and was incredibly impressed by the ease of operation!It is sooo smooth!

take out the old....put in the new...couldn't be easier!

Realized Ice Maker was not getting water during it's cycle and suspected water valve based on other posts to this web site. My fridge is 9 years old and the tubes connecting the valve were plastic screw on type. The new valve did not have threads to accept the nuts. Turns out all I had to do was cut the nuts off and insert the water tubes into the valve which auto-locked the tubes to the valve. Ice maker now works great.

followed guide on enet.