Models > FRS6LF7JS3 > Instructions

FRS6LF7JS3 Frigidaire Refrigerator - Instructions

All installation instructions for FRS6LF7JS3 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the FRS6LF7JS3
481-495 of 606
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken Door Bin

  • Customer: Shannon from Kansas City MO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
All simply popped the door bin in. I cannot believe it was so easily and that I waited so long to order the part. I have no diy skills and it required no skills. I was more than pleased and received the part in three days.

Clicking sound at hinge bearing whenever door opened

  • Customer: Richard from Rockford IL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
Removed everything from inside door. Loosened top plate screw, lifted off top of refrigerator. Lifted door up and onto the floor on its side. Removed old hinge bearing. Inserted new hinge nearing. Applied grease over hinge bearing surface (very important step). Replaced door, replaced top plate. Replaced all items on door. Clicking sound is completely gone.

Broken Meat Draw Rail

  • Customer: Chris from Raleigh NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Straight forward, identified the replacement part and followed the simple video that was posted on partselect.com. Very easy to find the part and do the install, 2 minutes tops. Replaced water filter, push the eject button on the old filter and push in the new filter.

broken bin

  • Customer: Timothy from West Babylon NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
snapped in the new bin

crisper support broke off

  • Customer: Denise from Claremore OK
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I tapped in the peg like it showed in video and pried out with flat screw driver and hammered other peg in flush with part

not working due to ice on coils

  • Customer: terry from litchfield IL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
unplugged frig, removed shelves & inner lower back panel in freezer side, removed defrost thermostat from tube, cut the wires and spliced in new stat wires with provided wire splices crimped together and replaced thermostat on tube it has been a week and no ice so far??. this was after 2 trips by the repairman who replace the defrost timer board which was most likely good at a total of $160!!! still cheaper than $1000 for a new frig!!!!!!!!!!!!!!

The ice crusher flap was broken.

  • Customer: Mary from Allegany NY
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
Took out the ice box, dumped the ice. Let warm up a bit. Then took out the housing and installed the new one. Works great. Saved a lot of money! Only took a couple days to receive the part. Great service.

One of the mounting tabs broke off

  • Customer: Thomas from Willis TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
This was the second time the part had failed and it was time to replace it. Rsther than hope a local store may have the part, I went on the internet and found PartSelect.com and ordered what I thought was the right part and it arrived here in Texas the next day! Turned out to be the wrong part. Oops! I contacted PartSelect by email to see if I could return the part and got an imediate response from Denise with the address ad instructions for returning the part and a very generous offer to help select the right psrt. I gave her the refrigerator/freezer model number and she immediately respoded with the part number. I rerordered the part and it again arrived the next day. I slipped it into place on the refrigerator door and it fit!! End of problem but not quite the end of the story. I received an email a couple of days later informing me that the money due me from the first order was on it's way. Color me a very happy customer!!

misplaced

  • Customer: michael from covington GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
When my wife and kids moved down they lost the upper bracket and the screw for the lower cam. parts show up and matched perfectly to the orginal no issues at all

My Ice Maker stopped making ice and the water dripped from the dispenser

  • Customer: Raymond from Sinking Spring PA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
I turned off the water, removed the cardboard cover from the back of the refrigerator; removed the 2 screws holding the water valve in place; unscrewed the plastic tubing from the valve; unplugged the wires to each solenoid (3); the old valve had threaded connections for the plastic water lines, the new valve didn't; I had to cut the ferrel off of the plastic lines so I could insert them into the new valve and then press the connector into the valve (I didn't anticipate something like this, but it worked fine); I reconnected the wiring and screwed the valve back into place. The ice maker started making ice and the water stopped dripping from the dispenser. The best $65 I've ever spent.

I made the mistake of taking the water hose out of it place!

  • Customer: John from Ashland MS
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Wrench(Adjustable)
  • 0 of 0 people found this instruction helpful
What would have been a simple job I made hard by pulling the water hose out of its place that was the hardest part about putting the ice dispenser back in, it took me about thirty minutes to put it back I !

Refrigerator warm, but freezer slightly cold

  • Customer: RONALD from LONG BEACH WA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
The website said 60% of people with same refrigerator problem solved the problem with a new fan kit. I received the fan kit within 3 days of ordering. Was shipped from Fresno, CA to Long Beach, WA. The fan kit was to be installed behind rear panel in the freezer compartment. When I removed the old fan motor, I noticed the shaft turned harder than the new fan motor, suggesting a problem with the old fan motor. I plugged in the obvious fan motor power bundle with no problem. The instructions and diagram with the kit nearly steered me wrong. Instructions, diagram and splices with the kit instructed to cut the "extra" wire bundle and splice "similar" wires (should have said same color wires). Luckily, I ignored those instructions when I remembered the U-Tube video depicted the extra wire bundle was to be inserted into a factory penetration in the back panel, facing the freezer compartment. This power bundle is for adding an ice maker, which my refrigerator did not have. When reassembled and the refrigerator restarted, I could immediately feel forced air in the refrig, where there was no flow before fixing. I observed that all the refrig and freezer dials do is act like a valve to increase or decrease air flow to the compartments. The dials have no mechanical or electrical connections, just designed to divert air flow from across the cold 'evaporator' fins. I recommend other consumers to remember carefully what they see in the video and watch again if stumped during the job. The video was better than the instructions which may have been written in China or India. I am happy. Repair was a lot cheaper than a new refrigerator and I would not have bought another Frigidaire. Thanks to this website. r. andersen

Water Filter needed replacement

  • Customer: Russell from Miami FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Part come in without delay - perfect fit - easy to install - works great

old seals on both fridge doors

  • Customer: Walter from Twinsburg OH
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
pulled the old seals off one at a time and starting from the top of each door, pressed the top edge of the seal into the groove, using the quik clamps to hold the top in palce at each top corner, went down each side of the door and pressed the seal into the groove, when I reached the bottom, I moved the clamps to the bottom and used thm to help press the seal into the bottom groove, Each door took about 15 min.

no ice or water

  • Customer: Margaret A from Quincy MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I followed exactly the video instructions on your web site. They are perfect and simple.
All Instructions for the FRS6LF7JS3
481-495 of 606