FRS6LF7GS4 Frigidaire Refrigerator - Instructions

No problem! Opened the package, took out the plastic bin and attached it to the door. Excellent service and really quick on the delivery. Thank you...

I changed the valve but still no ice, changed the filter also. think it was just froze. could have saved me 70 bucks

Purchased a replacement part only to find the new part had push on fitting and my part has screw on fittings. Went to Youtube where Partselect had a video on how to replace the part from screw fittings to push on fittings

Well to be honest with you, I followed the directions that someone else had posted. And it was somewhat easy. The only thing that I was having problems with was dropping the screws while trying to put them back. So I used a magnet, several times. My 9 year old grandson helped me. It really didnt take that long to replace. Good Luck

Ordered on line and replaced in a matter of minutes. Since this is the second one that has broken, I ordered a spare this time.

recieved the part in a couple of days part just slipped into slots. The new door was slightly different but did fit

My brother-in-law was the real hero here, he's quite the handy man. Once we realized that the loud noise and lack of cooling was the failed motor in the air damper unit we ordered the replacement after taking the entire unit and arm out of the fridge. Removing the entire damper unit was the only hard part due to the adhesive to the plastic mounting and Styrofoam insulation. Once out, we put the replacement in, reconnected the power switches and reseated the entire control unit arm into the fridge. The noise was gone and after a day the temperature in the fridge was back to 39 degrees Farenheit.

Had my 3 year old remove the 4 screws to holds the carboard in place. Pryde the old fan blade off with a screwdriver. slid the new fan blade on to the shaft then my 3 year old put the screws back in.

I removed the broken part and installed the new one. It took me all of 5 seconds! The service represenative who helped me get the right part for my fridge was very, very patient and courteous. Would i buy anything else, absolutely!!! Thank you for great service!

took old valve off one peice of it was broke off from freeze replaced it with new valve all but one conection was quick connect electric connections were color coded quick fix works fine thanks Gary

I removed the back panel ,cardboard-three screws,pushed the old fan blade off the motor and pushed the new fan on.Extremely easy.

Although I hated spending nearly $100 for two fridge parts...I was delighted with how the process worked! The website was easy! The parts came quickly! They were correct and EASY to install! My wife and I are VERY happy with our experience!

Not long after we bought this fridge, the plastic on the light switch cracked, making the lever stick out too much so that the door wouldn't close. It's been taped down ever since. I simply pulled the old switch out and plugged the new one in. I'm kicking myself that I didn't do this ages ago. It was so easy and now I can see inside my refrigerator again.

Super easy - just slide in. Wonderful company - part was here next day!

The changing of the water valve was pretty straight forward. First shut the water off to the ice maker, then pull the refrigerator out. Once that is done, then I removed the cardboard covering with a cordless drill, loosened the screws that held the water valve in place. The water valve assembly is colored coordinated so disconnecting and reconnecting the lines to the new valve assembly was pretty easy. Reattached the cardboard covering pushed refrigerator back and place turn on supply line and waited for the ice maker to fill up. After several cycles on the ice maker I made one slight adjustment on the ice cube size behind the cover of the ice maker. Total time one hour, then waiting for the ice maker to cycle a few times to ensure all was working properly.