FRS6HR45KS0 Frigidaire Refrigerator - Instructions

not much to putting a bin in just insure it is in clips correct and your done.what I was amazed with was the ease of getting correct cut sheet to order part and no drawn out 2 page forms to become a member and it arrived ups which is not always easy in alaska and was on my door step when we got back from a week trip out snowmachining. this was the most accurate and easiest part I have ever ordered, and I work on the supervision end of construction and spend so much wasted time ordering over the internet when I have to

I ordered a extra bin for the door. I ordered the wrong one the top bin and the bottom two are made different. I didn't notice that. The person I talked to was very kind and helpful. Also I have never received a product as fast as from this company. Great service. Thank you.

Had to pry the old one from the cabinet. Had to work remaining piece evenly as to not crack the cabinet of the fridge. Not the best design on Frigidaire's part but it was fixable. Thanks for stocking every part under the sun.

Remove and replace broke items. Crisper pan was the easy, just take the old one out and put the new one in. , The slider on the crisper was easy, just pop it out and reinstall. The front ice container was unscrew the screws and remove and replace old with the new. And insert the screw back in. Of course common sense tells you to dump the ice out of the ice containter first. Make sure everything lines up

Removed old one inserted new one . 15 seconds was done

when received slid in new bin

I simply pulled out the ice container and auger assembly and,after washing the new one, Iput the new one in and it worked immediately. It couldn't have been any simpler.

Realized Ice Maker was not getting water during it's cycle and suspected water valve based on other posts to this web site. My fridge is 9 years old and the tubes connecting the valve were plastic screw on type. The new valve did not have threads to accept the nuts. Turns out all I had to do was cut the nuts off and insert the water tubes into the valve which auto-locked the tubes to the valve. Ice maker now works great.

Pulled out the fridge from the wall, unplugged it, and turned off the water supply. Took off the cardboard backing at the bottom of the fridge. Cleaned the dust and gunk. Unscrewed the old valve. Unplugged the 3 electrical connections. Since the new fittings for the water lines were different, we unscrewed the old ones, lopped off the nipples, and inserted the ends of the water lines into the new connections (they were super easy - just push the line in until it clicks). Reattached the valve. Reattached the cardboard. Turned water back on, and plugged in the fridge. Our ice maker still didn't make cubes, though. So I took out the fill valve from the top rear of the fridge. It had a tiny piece of ice lodged in the bend of the back, right above where it connected to the water line. I rinsed it out, reinstalled, and now we have a full bucket of ice!!

problem still persists part did not fix problem. made repairs recommended per your site.

I was very thankful for the video that popped up when I ordered the crisper support part. It described exactly how to remove the damaged support without further damaging the inside of my regrigerator. I had the supports out and ready to go when my new part arrived. It took two minutes to do it the way it was described in the video and it worked like a charm. Thanks for the great tutorial and for putting it in a place that was accessible. Parts arrived very quickly as well. I didn't order enough supports so I had to re-order and they came quickly also.

Great job. Part arrived before promised. Packaged well. And most important...I actually got what I ordered. A pleasure doing business with you. Gene Lucarini

Turned off the water supply ,pulled the plug removed two screws to access theater lines the new valve body was a little different than the original I had to cut off the end of each hose and push them in to the new connections the hoses are size and color coded replaced the two screws put the water line on plugged it in and turned on the water checked for leaks twice and replaced the back cover

Open package slide new bins in. That easy

I simply replaced the broken drawer/pan guide and installed new pan/drawer. No tools needed as the parts literally slipped in place.