Models > FRS26H5ASB4 > Instructions

FRS26H5ASB4 Frigidaire Refrigerator - Instructions

All installation instructions for FRS26H5ASB4 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the FRS26H5ASB4
781-789 of 789
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Plastic frame brokem. Why, I don't know.

  • Customer: Ron from Murfreesboro TN
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed glass top cover, installed new plastic frame, cleaned glass drawer top and assembled parts.

Broken shelve

  • Customer: Robert from Lima AL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Unload shelve, took out, replaced done.

Broken upper crisper drawer cover

  • Customer: Ami from Los Angeles CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Repair was easy and fast. Just slide the cover to the back and snap the front, less than 10 seconds and it fits perfectly.

back clip of shelf broke allowing shelf to tilt

  • Customer: Burke from Norman OK
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Removed old shelf. Removed glass from shelf. Installed glass in new shelf. Installed new shelf into frig. Returned drawer to bottom of shelf. Super Easy.

Broken Lower Crisper Shelve

  • Customer: Edward from Miami FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Went on your website, originally ordered wrong part, upon discovering my mistake you immediately voided that purchase and then I ordered the correct part. Very professional and easy.

drawer/pan guide cracked

  • Customer: James from Winter Park FL
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I simply replaced the broken drawer/pan guide and installed new pan/drawer. No tools needed as the parts literally slipped in place.

Water was leaking where filter fit into filter base

  • Customer: Nathan from Dickson TN
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
I was able to take away the trim covering the parts with a nutdriver. The base was disconnected using a phillips head screwdriver. The only real issue was how to disconnect the plastic water lines from the old base and connect them to the new one. I finally realized I just had to cut the lines where they entered the filter base because they would not pull out. I then finally understood that to install them into the new base I just had to push them in securely. The lines were long enough to do this but probably would not be long enough to install another filter base. In that event I do not know what all would have to be done. The leak had been going on for years (it only leaked when water was running to the ice machine or water dispenser). It is great having it repaired and we hope to get quite a few more years out of this old fridge.

Water dispenser/ice maker not working

  • Customer: Sierra from Seattle WA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
I followed previous directions, and would recommend them! Briefly, I removed the plastic covers for the water filter, water tubes, temperature control switches to allow removal using a screwdriver and a nutdriver(I think)to remove the hexagonal screws. I also removed the water filter before beginning. I pressed the blue thingies in the back towards the base to remove the water supply lines. It was a bit tricky, and took the bulk of the repair time, but they came lose once enough pressure was applied. I took out the old filter base, put in the new one, attached the water lines, and put back all the covers. Everything comes apart very easily, and went back together very easily. A simple repair that had us back in ice and filtered water within an hour!

Water Dispenser Actuator Sheared Off

  • Customer: Lester from Gilroy CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Disconnect power. Removed dispenser port base by pulling out to reveal three phillips screw fasteners at bottom of port frame. Unscrewed fasteners and pryed out frame which has snap inserts at top. Rotated top of frame outward to expose actuator axle retaining clips which then were unscrewed to allow removal of actuator and release it from return spring. Replaced actuator, clips and reset spring. Reset frame, screws and base cover.
All Instructions for the FRS26H5ASB4
781-789 of 789